Installation Safety comes first Rafter spacing Do not step directly on the sheets between the purlins! When installing Ez Glaze or doing maintenance work, always use stepping ladders or crawling boards, supported by minimum three roof structural elements. Ez Glaze is designed for 50mm rafters. ...
Page 3
Installation Foamed tape application (optional). Fixing the 1st Ez Glaze panel Foam tape Use Self-Tapping screw 50mmx6.5mm with 25mm EPDM washer Fix the first Ez Glaze panel’s outer corrugation, using specified screws and Applying foamed tape on each rafter will reduce friction due to thermal expansion. washers through the pre-drilled holes.
Installation Fixing the 2nd Ez Glaze panel Side Wall Flashing in case the panel is trimmed (Not supplied by Palram) Flashing Aluminum L Profile Self-Tapping Screw Sealing Foam Tape Ez Glaze Fix both panels overlap, using specified screws and washers through the pre-drilled holes.
Page 5
Ez Glaze Butyl Tape Installing Head Wall Flashing (Not included in Ez Glaze Kit) Screws are not included in Ez Glaze Kit PALRAM SA/NT PALRAM NSW/ACT PALRAM QLD PALRAM VIC/TAS PALRAM WA 517A Cross Keys Road Unit 2, 26 Redfern St.
Need help?
Do you have a question about the Ez Glare 50 and is the answer not in the manual?
Questions and answers