Ace-tec Attackcam F12 User Manual

Handheld thermography camera

Hide thumbs

page of 13

/ 13
Bookmarks

Quick Links

Download this manual

Attackcam F12 / F20

Handheld Thermography Camera

User Manual

Need help?

Do you have a question about the Attackcam F12 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ace-tec Attackcam F12

Page 1 Attackcam F12 / F20 Handheld Thermography Camera User Manual...
Page 2 ERRORS”. Ace-tec MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL ace-tec BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF ace-tec HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 3 This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and, if applicable, the supplied accessories are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
Page 4 If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Manufacture Address: Ace-tec GmbH, Sandweg 5, 25899 Niebüll COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement.
Page 5 Introduction Product Introduction The handheld thermography camera is a camera with thermal and optical images. The built-in high-sensitivity IR detector and high-performance sensor detects the temperature change and measure the real-time temperature. The accuracy of temperature measurement is ± 2 °C (3.6 °F) or ± 2% when the ambient temperature is from 15 °C to 35 °C (59 °F to 95 °F) and the object temperature is above 0 °C (32 °F).
Page 6 Palette Mode F12 The Attackcam is started in the NFPA Mode NFPA Mode For Fire Fighting / Rescue / Search / Safety Colour Temperatur Range -20° -150° Colour black-cold/white-Hot 150° -300° Colour yellow 300° -450° Colour orange 450° -610° Colour Red More Informations over the Colour range and the sense under www.attackcam.net Preparation Power On/Off...
Page 7 Certain models support the White Light. Please refer to the actual device or datasheet. Capture Snapshots Steps: In the live view interface, pull the trigger to capture snapshot. The live view freezes and device displays the snapshot with temperature information. Export Snapshots Purpose: Connect the device to your PC with the magnetics usb cable, you can export the captured snapshots.
Page 8 Button Function Hold: Power On/Off Press: Display menu or confirm operation Exit the menu or return to previous menu. Navigation Button ▽ △ Press , to select parameters. Press to confirm. Component Function Trigger In live view interface, pull the trigger to capture snapshots. In menu mode, pull the trigger to switch to live view.
Page 9: Temperature Measurement
Remove the lens cover, and hold for over three seconds to turn on the device. You can observe the target when the interface of the device is stable. Power Off When the device is turned on, hold for three seconds to power off the device. Interface Description Temperature Measurement The temperature measurement function provides the real-time temperature of the scene and display it on the left of your screen.
Page 10 Launch the app, and add the device to online devices. Result You can view the live view, or capture snapshots via the app. Note Certain models support the Wi-Fi. Please refer to the actual device or datasheet. Image Settings Thermal or Multi Fusions Mode - MFM Steps: In the live view interface, press to show the menu.
Page 11 -20° -150° Colour black-cold/white-Hot 150° -300° Colour yellow 300° -450° Colour orange 450° -610° Colour Red More Informations over the Colour range and the sense under www.attackcam.net Here is an example of setting the Mode. Steps: In the to select the Palettes Mode Press button to save and exit.
Page 12 10.2 Upgrade Steps: Connect the device to your PC with the usb cable and open the detected disk. Copy the upgrade file and replace it to the root directory of the device. Disconnect the device from your PC. Reboot the device and then it will upgrade automatically. The upgrading process will be displayed in the main interface. Note After the upgrading, the device automatically reboot.
Page 13 The camera can not be operated or no responding. Hold to reboot the camera. Applications and instructions at your language. Waranty conditions and extensions, and accessories items under www.attackcam.net ace-tec GmbH Sandweg 5 25899 Niebüll Fone: +49 4661 675060 Fax.:...

This manual is also suitable for:

Attackcam f20