Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Trox Manuals
  4. Spa Accessories
  5. TR2X
  6. Installation manual

Trox TR2X Installation Manual

Air diffusers
Hide thumbs

Advertisement

Quick Links

Download this manual
Product overview
Fig. 1: Schematic illustration TR2X
1
Front border
2
Countersunk holes
3
Attachment (SAS)
Important notes
Information on the installation manual
This manual enables operating or service personnel
to correctly install the product described below and
to use it safely and efficiently.
It is essential that these individuals read and fully
understand this manual before starting any work.
The basic prerequisite for safe working is to comply
with the safety notes and all instructions in this
manual.
The local regulations for health and safety at work
and general safety regulations also apply.
Installation manual
Air diffusers
Ventilation grille TR2X
Air diffusers Ventilation grille TR2X
GB/en
Other applicable documentation
In addition to these instructions, the following docu-
ments must be observed:
Product data sheets
Limitation of liability
The information in this manual has been compiled
with reference to the applicable standards and
guidelines, the state of the art, and our expertise
and experience of many years.
The manufacturer does not accept any liability for
damages resulting from:
Non-compliance with this manual
Incorrect use
Operation or handling by untrained individuals
Unauthorised modifications
TROX Hesco Schweiz AG
Neuhofstrasse 4
8630 Rüti ZH
Switzerland
Phone: +41 55 250 71 11
Fax: +41 55 250 73 10
E-Mail: trox-
hesco@troxgroup.com
http://www.troxhesco.ch
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TR2X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trox TR2X

  • Page 1 Air diffusers Fax: +41 55 250 73 10 E-Mail: trox- hesco@troxgroup.com Ventilation grille TR2X http://www.troxhesco.ch Product overview Fig. 1: Schematic illustration TR2X Front border Countersunk holes Attachment (SAS) Other applicable documentation Important notes In addition to these instructions, the following docu-...
  • Page 2 In case of transport damage or incomplete delivery, inform the forwarding agent and the supplier immediately. After inspection of the goods, put the product back into its packaging to protect it from dust and contamination. Air diffusers Ventilation grille TR2X...
  • Page 3 Protect the product from humidity, dust and  of dust or humidity. contamination Storage temperature: -10 °C to 90 °C  relative humidity: 80 % maximum, no conden-  sation Air diffusers Ventilation grille TR2X...
  • Page 4 (screw connection) to prevent the device from falling down. Fixing types Fig. 2: Fixing types Fastening -0: Fastening Standard countersunk hole. Mounting -SP: Screwless mounting (rear view). Quantity countersunk holes Length B [mm] Height H [mm] Air diffusers Ventilation grille TR2X...
  • Page 5 Assembly Quantity of fixings SP Length B [mm] Height H [mm] Air diffusers Ventilation grille TR2X...

  • Page 6: Technical Data

    Dimensions Fig. 3: Installation opening no entry Fig. 4: Installation opening SP X must be at least 4 mm for SP fixing Fig. 5: Fixings Fixing countersunk hole Concealed screw fixing SP without installation subframe Air diffusers Ventilation grille TR2X...
  • Page 7 (B-5) x (H-5) (B-10) x (H-15) TR2X-R/RA Fixing Installation opening [mm] min. clamping range [mm] Countersunk hole (B-10) x (H-15) (B-10) x (H-15) Fig. 6: Screw hole pitch Screw hole pitch TR2X Length B [mm] Air diffusers Ventilation grille TR2X...
  • Page 8 2x283.5 2x383.5 Screw hole pitch TR2X Height H [mm] TR2X max. grille weights [kg] TR2X weights attachment AG without grille [kg] TR2X weights attachment AS without grille [kg] TR2X weights attachment SAS without grille [kg] Air diffusers Ventilation grille TR2X...
  • Page 9 Technical data Air diffusers Ventilation grille TR2X...
  • Page 10 Technical data Installation linear run section The end and centre sections are assembled using a coupling plate. The seams are invisible after assembly. Fig. 7: Installation linear run section Air diffusers Ventilation grille TR2X...
  • Page 11 Fig. 8: Installation concealed screw fixing -SP The dimension w must be at least 4 mm Air connection Ventilation grilles do not have an air connection, they are installed directly into air ducts or similar. Air diffusers Ventilation grille TR2X...
  • Page 12 Technical data Dimensions Fig. 9: TR2X-V/VH TR2X-VH TR2X-VH TR2X-V TR2X-V Air diffusers Ventilation grille TR2X...

  • Page 13: Initial Commissioning

    (anti-clockwise) to adjust or fasten the hit and miss damper. Tighten the screw with max. 0.5 Nm AG: manual adjustment  AS/SAS with screwdriver  Fig. 12: Attachments -AS Damper element with hit and miss damper, adjust- able, secured with a locking screw Air diffusers Ventilation grille TR2X...
  • Page 14 Initial commissioning Air pattern Setting the air direction on site using the TR2 key. Fig. 13: Setting the air direction Air diffusers Ventilation grille TR2X...

  • Page 15: Maintenance And Cleaning

    To ensure permanent protection against particle ingress and suspended particles, we recommend using only original TROX filters. Filter medium TGM 315-10-3 coarse 45% To avoid downtime of the ventilation and air con- ditioning system, we recommend stocking the required filters. Air diffusers Ventilation grille TR2X...
  • Page 16 In case of doubt, contact your local authori- ties or a specialist disposal company. Note: The grille must be dismantled for disposal. If no disposal or return agreement with TROX GmbH is in place, we recommend disposing of the materials as follows: Pos. Component...