Download Print this page

Wall Lenk Bella Tavola Click 2 Cook BT-3500 Instruction Manual

Dual nozzle bbq lighter & blower

Advertisement

Quick Links

DUAL NOZZLE BBQ LIGHTER & BLOWER
CONTINUOUS
USE BUTTON
Battery Compartment
1.
Unlatch and remove the battery door and insert 3 AA standard or
rechargeable batteries (not included). New batteries will provide
up to 30 minutes of continuous run time.
2.
Match battery placement with diagram inside the battery
housing.
3.
Replace battery door and latch shut. When fan power is
diminished, replace the batteries.
Gas Filling
1.
Adapter are not normally required when filling.
2.
To refill, hold butane fuel (not included) above the tool since fuel
transfer is dependent on gravity.
3.
Press while holding vertically downward into center of the refill
valve and apply firm pressure.
4.
Stop refilling when gas reaches about 80% full.
5.
Wait five minutes for the fuel to stabilize and for residual fuel to
vent.
Fan Blower Operation
1.
To turn on the fan blower, push the safety switch down in the
middle of the button
2.
With the switch depressed, slide the button forward to turn the
power on to the blower.
3.
The fan blower will continue operation when the button is in the
forward position.
4.
To turn the fan blower off, slide the switch back into the off
position.
IGNITION SAFETY
SWITCH
GAS ADJUSTMENT
IGNITION SWITCH
FAN BLOWER SWITCH
BT-3500
INSTRUCTION MANUAL
LIGHTER
FLAME
FAN
BLOWER
NOZZLE
NOZZLE
BATTERY
BATTERY
COMPARTMENT
COMPARTMENT
REFILL
REFILL
VALVE
VALVE
PUSH SWITCH
FORWARD TO
POWER ON

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bella Tavola Click 2 Cook BT-3500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Wall Lenk Bella Tavola Click 2 Cook BT-3500

  • Page 1 BT-3500 INSTRUCTION MANUAL DUAL NOZZLE BBQ LIGHTER & BLOWER IGNITION SAFETY SWITCH GAS ADJUSTMENT IGNITION SWITCH CONTINUOUS USE BUTTON FAN BLOWER SWITCH FLAME LIGHTER BLOWER NOZZLE NOZZLE BATTERY BATTERY Battery Compartment COMPARTMENT COMPARTMENT Unlatch and remove the battery door and insert 3 AA standard or rechargeable batteries (not included).
  • Page 2 Ignition Sequence Set the gas adjustment wheel to middle setting for the initial lighting of the torch function. Slide the child safety switch forward and press the ignition button simultaneously. It may take two or three tries before the torch ignites. Each try will require sliding the child safety switch forward and pressing the ignition button For continuous flame, press the continuous use button before releasing the ignition button.