When The Printer And Your Smartphone Are Already Paired - FujiFilm instax mini Link 3 User Manual

11
You are now ready to use the printer� To select an
image to print, click the Simple Print button on the
home screen and select an image from your photo
roll�
To edit your image, click on the below editing options on
the bottom of the screen before printing�
Enters text or attaches a sticker to images.
Zooms up/down or rotates images.
Applies a filter on images.
Adjusts the brightness of images.
12
Tap or swipe the image up on the screen to print
your image�
After a slight transmission delay, the printer starts printing.
You can also select the number of images to print during
image transfer.
10
13
When the film has been fully ejected (the printer
stops making a sound), grasp the edge of the film,
then take it out�
Confirm the number of images remaining in your
INSTAX MINI instant film pack on the Smartphone App
screen.
When the Printer and Your Smartphone Are Already
Paired
1
Press and hold the Power button for approximately
1 second to turn the printer on�
The LED lights up.
Power button
2
Start the downloaded INSTAX MINI LINK
Smartphone App�