Summary of Contents for Freedom Won LiTE 2 BESS Series
Page 1
LiTE 2 BESS Range Remote Gateway Setup Guide This document specifically covers the LiTE 2 BESS range. For more detailed information, refer to the LiTE 2 installation manual. SETUP GUIDE Copyrights reserved by Freedom Won Contact us: www.freedomwon.co.za...
Remote Gateway Setup Guide Technical and Installation Assistance - Contact: Please contact your Freedom Won distributor, reseller or installer for technical and installation support. A directory of distributors and reseller installers is available at www.freedomwon.co.za. For advanced support, please contact support@freedomwon.co.za.
LiTE 2 Freedom Won LiTE 2 BESS Range Wi-Fi Setup Guide 1. Power On the Battery Press the ON button and ensure the battery is powered on before continuiung to the next step. 2.1 Ensure Wi-Fi Signal Before connecting an antenna, we need to make sure that Wi-Fi is available near or around the room where the battery is installed.
Page 4
LiTE 2 Freedom Won LiTE 2 BESS Range Wi-Fi Setup Guide Username: user Password: freedom Fig. 1 4. Once signed in, the system will load and show you the device status screen. This screen will show you the status of your connection. To set up Wi-Fi, navigate to the network settings in the left-hand menu.
Page 5
LiTE 2 Freedom Won LiTE 2 BESS Range Wi-Fi Setup Guide 5. This menu will now display the heading network setting. We will start by clicking the search button on AP’ s SSID. This will initiate a search for available Wi-Fi networks.
Page 6
LiTE 2 Freedom Won LiTE 2 BESS Range Wi-Fi Setup Guide Once you have pressed “Apply”, the Wi-Fi list menu will close and we will be back at the STA Interface Settings or “Wi-Fi Settings”. You will see your Wi-Fi name now appears in the AP’ s SSID box.
4. Once Everything is Connected, Access the Portal If the battery has been successfully connected to the network via Wi-Fi/Ethernet, the Freedom Won portal will now be accessible via the following link: https://portal.fw-cloud.net. Please consult the portal manual on how to use the Freedom Won portal.
Page 8
4. Identifying a Freedom Won LiTE 2 BESS Freedom Won LiTE 2 BESS units have different elements from the LiTE 1 range BESS units. The model number on the front of the unit will incorporate a single forward slash (/) for LiTE (1) range units or a double forward slash (//) for LiTE 2 range units.
LiTE 2 RANGE SCAN ME TO LOG A SUPPORT TICKET Freedom Won Technical Support Contact Details Please use the following contact details to make enquiries on technical matters or for actual technical support with design and/or commissioning: Email: support@freedomwon.co.za Mobile:...
Need help?
Do you have a question about the LiTE 2 BESS Series and is the answer not in the manual?
Questions and answers