Voltaic V25 Instructions

USB Battery Pack & Solar Charger Instructions
Instructions
The Voltaic USB Battery Packs are designed to charge most USB
devices including smartphones, tablets, DSLR cameras, and micro-
controllers. To charge your device, simply plug into either of the
USB outputs or top USB-C port. The battery packs can be
recharged via any USB port or from a Voltaic 5-6V solar panel.
Battery packs can be charged while charging your device.
The interior of a solar charger case can become hot in
!
the sun. In hot conditions, open the battery compartment to
increase air flow and avoid overheating.
Charging USB Devices
Using your device's USB charging cable, plug directly into either of the
two (2) USB Outputs or top USB-C PD port. Device will automatically
begin to charge.
USB ports feature Always On technology and will not shut off even if your
device is drawing low or no power. To stop charging your device, double
tap the Power Level Button or disconnect from the battery. To resume
charging, tap the Power Level Button once.
Remove cable(s) from USB Outputs when storing the battery for an
extended period.
For V25, V50 & V75
support@voltaicsystems.com
Product Details
1. Power Level Button
2. Power Level Indicator
3. USB-C Input
4. USB-C PD Input/Output
5. USB Output 1
6. USB Output 2
7. USB-C Charging Cable
Charging Battery
Recharge the battery from a Voltaic
5-6 Volt solar panel or any USB port
(with the included USB-C Charging
Cable). Can also be recharged via
top USB-C PD port using any USB-C
to USB-C cable (not included).