Getting Started - Motorola STAC130 Manual

stac130.bk : intro.fm5 Page 2 Tuesday, May 12, 1998 4:27 PM

Getting Started

In order to get started straight away with your new GSM
StarTAC, follow these simple steps:
Charge the Battery
! Before you use your phone, please see the 'Your Battery'
section for important information on battery charging.
1 Remove the battery from its holder and clip it into your phone.
2 Connect the travel charger to the phone and plug it into a
standard mains socket.
Powering On
1 Insert the SIM card into the tray on the side of your phone.
2 Fully extend the antenna.
3 Open your phone and press S to switch on.
4 If prompted, enter your PIN code and press O.
Once a GSM network is located by your phone, it connects and
the network name appears on the display.
English
2 Introduction
Making a Call
1 Enter the number you want to call.
Even if you call a local number, you must also enter the full
A
area (but not country) code.
2 Press O. Your call is placed!
IMPORTANT! Ending a Call
When you have finished your conversation, you must end the
call, even if the other person terminates the call. To end the call,
press O, C or close the phone.
If you do not end the call, you will remain connected and you
A
will be charged for the duration of the connection.
Exploring
Now you can leave your phone on while charging the battery,
making and receiving calls, and exploring features of your phone
at your leisure.