Summary of Contents for Atim Cloud Wireless ACW/LW8-TST
- Page 1 ATIM Cloud Wireless LoRaWAN Tester Quick Installation Guide Concerned model: ACW/LW8-TST...
-
Page 2: Table Of Contents
Table of Contents Technical specifications ............................... 3 Operating mode .................................. 3 Prior registration ..............................3 Join process ................................3 Recharge ................................. 3 Coverage test ................................4 How to get precise data on the ATIM Cloud Wireless Platform? ................5 ATIM_ACW-LW8-TST_QIG_EN_V1.4... -
Page 3: Technical Specifications
Operating mode a. Prior registration The tester must be commissioned beforehand on a LoRaWAN network (subscription in addition to the ACW/LW8-TST). IDs shared at shipment with the device via email allows the commissioning of the tester on the LoRaWAN network (DevEUI, DevAddr, AppEUI, AppKey, NwkSKey, AppSKey). -
Page 4: Coverage Test
d. Coverage test To realize a network coverage test, the below steps should be followed: 1. The tester must be held vertically and from the bottom part (refer to the adjacent picture). 2. Press the pushbutton. 3. Wait 10 seconds (Downlink maximum response time from the LoRaWAN network) until the response of the Sigfox station. -
Page 5: How To Get Precise Data On The Atim Cloud Wireless Platform
The platform is compatible multiple LoRaWAN operators as Objenious or Orange and the LoRaWAN gateways for example. See below an example of visualization with a tester connected with LoRaWAN operator, Objenious: Below, an example of visualization of precise results of network quality test of the ACW/LW8-TST on the ATIM IoT platform: ATIM_ACW-LW8-TST_QIG_EN_V1.4...
Need help?
Do you have a question about the ACW/LW8-TST and is the answer not in the manual?
Questions and answers