Ritron PR Series User Manual

Professional two-way portable radio

Hide thumbs

page of 6

/ 6
Bookmarks

Quick Links

Download this manual

Professional Two-Way

PR Series Portable Radio

User Manual

Model: VHF MURS PR-10M

License-Free Business

•

505 W. Carmel Drive, Carmel, IN 46032 • Phone: 317.846.1201 • Email: sales_info@ritron.com

respective owners. Ritron v.8/2024

Analog VHF MURS

2 Watt VHF

32 Channel Capability – 2 Zones of 16

Loud Audio Output - 1000mW

Rugged, Compact Design

Resistant to Water/Dust Intrusion

FCC Approved

CTCSS and DCS Tone Codes

Channel Scan

800-USA-1-USA (872-1-872)

www.ritron.com

Dear Valued Ritron Customer,

Thank you for your purchase of the VHF MURS License-Free PR-10M radio.

Each radio comes pre-programmed with all 7 of the allowed MURS channel

frequencies and 1 of the 258 different tone codes.

The table below lists the factory default channel frequencies and CTCSS

tones pre-programmed into your radio.

IMPORTANT: To re-program your PR-10M radio from the

factory defaults you must first download the FREE PR-10M

PC programming software on your Windows computer,

and you must purchase the required programming cable

(pn 60201138)15$ + freight. Call Ritron at 800-872-872.

1. Go to https://www.ritron.com/tools to download the FREE "PR-10M

VHF MURS radio PC Programming Software"

2. Please call Ritron at 1-800-872-872 to order pn 60201138 programming

cable for the PR-10M radio. ($15 + freight. VISA or MasterCArd accepted).

NOTE:

PR-10M does NOT support selective signaling capability for

GateGuard systems (i.e. 2-tone or DTMF).

PR-10M VHF MURS FACTORY DEFAULT SETTINGS

VHR MURS Ritron Table

Channel Freq. MHz Freq. Code #

151.8200

151.8800

151.9400

154.5700

154.6000

154.5700

154.6000

FC# = Frequency Code

The standard antenna supplied with the PR Series radio is cut for

operation at the following frequency bands:

VHF: MURS only

Tone Ritron Tone

Code #

TX Pwr Bandwidth

2 Watts Narrow 12.5KHz

2 Watts Wide

25KHz

Need help?

Do you have a question about the PR Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ritron PR Series

Page 1 505 W. Carmel Drive, Carmel, IN 46032 • Phone: 317.846.1201 • Email: sales_info@ritron.com © 2024 Ritron, Inc. All rights reserved. Ritron is a registered trademark of Ritron, Inc. All other trademarks are the property of their respective owners. Ritron v.8/2024...
Page 2 Controls and Functions ....4-5 110-220V AC Adaptor. RSM-10X 2-pin LED Display Indicators.....5 Standard PR series audio accessories e.g. remote Charger Information......5 speaker mic and earset are not compatible with VOX function. VOX function requires special VOX capable audio accessories. Contact factory for availability.
Page 3 • Fully charge the battery before use for 11. Audio Accessory/Dust Cover maximum capacity and operation. 12. Spring-action Belt Clip • The battery is designed for the PR Series charger only. Please do not charge the battery Use the PC Programmer to with any other brand charger.
Page 4: Safety Standards
• Turn ON or OFF a specific feature assigned to that PFB. a transmitting device. • Repair of Ritron products should be performed only by Ritron The table listed below indicates the Factory Default settings for each of the PFB’s authorized personnel.
Page 5 -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • When worn on the body, always place the radio in a Ritron approved clip, holder, holster, case, or body harness -Consult the dealer or an experienced radio/TV technician for help.
Page 6 IMPORTANT: This warranty sets forth the full extent of RITRON’s express responsibilities regarding the covered products, and is given in lieu of all other express warranties. What RITRON has agreed to do above is your sole and exclusive remedy. No person is authorized to make any other warranty to you on behalf of RITRON.

This manual is also suitable for:

Vhf murs pr-10m