Advertisement
Quick Links
Advertisement
Related Manuals for AYC TD201
Summary of Contents for AYC TD201
- Page 1 USER MANUAL FACIAL STEAMER TD201...
- Page 2 INSTALLATION INSTRUCTIONS: 1. Assemble the legs together according to the middle cutouts. 2. Place the claw a top the legs. 3. Take the base post and fit it into the claws upper cavity. 4. Flip the Leg-Claw–Post assembly upside down. This will allow you to tighten the mounting plate, lock washer, and washer with the bolt to the Leg-Claw-Post assembly. 5. Turn your assembled base unit over so that the casters are sitting on the floor. Then place the extension post into the base post.
- Page 3 JAR REMOVAL: 1. To remove the glass jar for cleaning, unlatch the plexiglass cover surrounding the jar. 2. The glass jar is held in place by a mount plate. Loosen the mounting plate and turn the plate so that it is no longer under the jar. 3. The jar is now ready to be removed. 4. When placing the jar back on the steamer make sure the gasket is in its correct place.
- Page 4 CAUTION: 1. Vaporizer will turn off automatically when the water is less than 1/3 Volume. 2. Distillable water should be used in the vaporizer. The use of tap water will eventually cause malfunction of the machine, due to calcium and mineral deposits. 3. The glass jar and heating elements should be cleaned once a week by filling with a solution of distillable water and white vinegar (one cup white vinegar to one quart water), and it will be cleared overnight. The glass jar is empty and rinsed then stored until ready for use. 4. Please use the soft metal-thread brush for eliminated when the heating elements sticked with some material of lime.
Need help?
Do you have a question about the TD201 and is the answer not in the manual?
Questions and answers