Press (1s or less) Adjusts setting value Adjusts setting value Hold (3s or more) Hold (3s or more) Tianjin Elco Automation Co.,Ltd Switches between N.O./N.C. witches to the setting screen No.12, 4th XEDA Branch Rd,Xiqing Economic-Technological Development Area, Tianjin 300385,P.R.China...
Page 5
[ Auto “ 6.5.2 Lon Don Auto Auto R,G,B R,G,B Tianjin Elco Automation Co.,Ltd No.12, 4th XEDA Branch Rd,Xiqing Economic-Technological Development Area, Tianjin 300385,P.R.China Germany Tel +49 70626599-260 Tel: +86 22 23888288 Germany Fax +49 70626599-261 Fax: +86 22 23788399 Manufactured in China www.
The blinking numeric value that appears after calibration is the setting value. Tianjin Elco Automation Co.,Ltd After master calibration or master addition calibration has been executed, the No.12, 4th XEDA Branch Rd,Xiqing Economic-Technological Development Area, setting value cannot be increased.
Page 8
“7.9 Password” decrease the value. Press and hold Keys locked Key lock released Tianjin Elco Automation Co.,Ltd the[ ] button and [ ] button No.12, 4th XEDA Branch Rd,Xiqing Economic-Technological Development Area, at the same time Tianjin 300385,P.R.China...
Page 9
N.O. Auto 10ms 10ms Auto 60ms 60ms Tianjin Elco Automation Co.,Ltd No.12, 4th XEDA Branch Rd,Xiqing Economic-Technological Development Area, Tianjin 300385,P.R.China Tel: +86 22 23888288 Germany Tel +49 70626599-260 Germany Fax +49 70626599-261 Fax: +86 22 23788399 Manufactured in China...
The effect of mutual interference can be reduced by changing the light emission period. When using multiple Select the desired detection mode. See“6.5.2 Detection Mode”. OSM47 Series units in close proximity, set each unit to a different light emission period. When selecting frequency 7.2 Response Time B (alternate frequency), the response time becomes approximately 20% slower.
Need help?
Do you have a question about the OSM47 and is the answer not in the manual?
Questions and answers