Adjusting The Tone (White Balance) - Canon IXUS 80 IS User Manual

100
Use the LCD monitor to confirm that the image was recorded
at the desired brightness.
Please note that camera shake becomes a factor at low
shutter speeds. Shoot with the camera attached to a tripod.
Use of the flash may result in an over-exposed image. If this
occurs, shoot with the flash set to

Adjusting the Tone (White Balance)

Normally, the
balance. When the
change the white balance using a setting appropriate for the light
source.
Auto
Day Light
Cloudy
Tungsten
Fluorescent
Fluorescent H
Custom
(Auto) white balance setting selects an optimal white
setting cannot produce natural looking colors,
Settings are automatically set by the camera.
For recording outdoors on a bright day.
For recording under overcast, shady or twilight
skies.
For recording under tungsten and bulb-type 3-
wavelength fluorescent lighting.
For recording under warm-white, cool-white or
warm-white (3-wavelength) fluorescent lighting.
For recording under daylight fluorescent, or daylight
fluorescent-type 3-wavelength fluorescent lighting.
Adjusts the optimal white balance for the shooting
conditions using the white balance data retained in
the camera from a white-colored object, such as a
white paper or cloth.
.
Available Shooting Modes p. 220