Related Manuals for SIEKON Classic RL-LARS2-12.8V100 Series
Summary of Contents for SIEKON Classic RL-LARS2-12.8V100 Series
- Page 1 User Manual 12.8V 100Ah Classic Lithium Iron Phosphate (LiFePO ) Battery ４ www.siekonenergy.com support-online@siekonenergy.com +1(909)345-9563...
-
Page 2: Table Of Contents
CONTENTS Packages Contents Important Safeguards Warnings Before Using Specifications Before First Use Check the State of the Charge How to Test Battery Using a Multimeter Using Your Battery Connection Installation Inverter Setting Recommended Cable Sizing How to Charge Your Batteries Troubleshooting Warranty Information... -
Page 3: Packages Contents
PACKAGES CONTENTS User Manual Insulating Caps Battery Terminal Bolts IMPORTANT SAFEGUARDS WARNINGS BATTERY DISPOSAL To prevent any risks of fire and/or explosion, please wrap the electrode in insulating paper before disposal. PROHIBITION OF DISASSEMBLY Do not disassemble the battery. Unguided Disassemble may cause an internal short circuit and lead to potential risks such as gassing, fire hazards, and explosions. -
Page 4: Before Using
PROHIBITION OF USE WHEN UNIT OR PARTS ARE DAMAGED Do not use the unit when the unit/parts are damaged in any way. Do not use it when emitting smells of electrolyte, leaking, and/or any other abnormalities appear. When the electrolyte emits smells and/or leaks, please immediately place the battery away from the heat source to prevent any potential risks of fire hazards and explosions. - Page 5 Suggestions for Long-term Storage: Temperature The battery can be operated at a temperature of -20°C to 65°C / -4°F to149°F and a temperature between -20°C to 45°C / -4°F to 95°F is ideal for long-term storage. Store in a fireproof container and away from children. Capacity For a longer-lasting product, it is best to store your battery at a 50% charge level and recharge every three months if it is not going to be used for a long time.
-
Page 6: Specifications
SPECIFICATIONS Basic parameters Battery type-Chemistry LiFePO （LFP） Nominal Voltage 12.8V Nominal Capacity 100Ah Nominal Energy 1280Wh Recommend Charge Current Recommend Discharge Current Max Continuous Charge Current 100A Max Continuous Discharge Current 100A Voltage Window 10~14.6V Recommend Charge Voltage 14.6V Charging limit voltage 14.6V Discharge cut-off voltage... - Page 7 SPECIFICATIONS Charge Temperature 0~55°C Discharge Temperature -20~65°C Storage Temperature -20~35°C Self Discharge per Month <3% Max in Parallel Max in Series Case Material Dimensions(LxWxH) 329*172*214mm 12.95*6.77*8.43inch Weight 10.2±0.5kg Terminal Type Terminal Torque 8.5NM BMS Build-in Cycle Life(0.5C, 25°C@100% DOD) 5000 Cycles...
-
Page 8: Protection Parameters
SPECIFICATIONS Protection parameters Charging Overcurrent Protection Discharge Overcurrent Protection Short Circuit Protection High Temperature Protection-Charging 54±5°C Low Temperature Protection-Charging -15±5°C High Temperature Protection-Discharge 75±5°C Low Temperature Protection-Discharge Transient Voltage Suppressors... -
Page 9: Before First Use
BEFORE FIRST USE CHECK THE STATE OF THE CHARGE Test the Battery Voltage with a Multimeter Refer to page 8 for 'How to test battery using a 'Multimeter' If the voltage tested is below 12V, please contact us at support-online@siekonenergy.com to help solve the problem. -
Page 10: How To Test Battery Using A Multimeter
HOW TO TEST BATTERY USING A MULTIMETER Based on the characteristics of Lithium Iron Phosphate (LiFePO ) batteries, the voltage batteries during charging/discharging is not the real measured by all LiFePO voltage of the battery. Therefore, after charging/discharging and disconnecting the battery from the power source, the voltage of the battery will gradually drop/increase to its real voltage. -
Page 11: Using Your Battery
USING YOUR BATTERY CONNECTION THE PREMISE OF SERIES/PARALLELL CONNECTION To connect in series or/and parallel, batteries should meet the below conditions: 1. Identical batteries with the same battery capacity (Ah) and BMS; 2. From the same brand (as lithium battery from different brands has their special BMS); 3. - Page 12 Step2: Voltage Balancing Before Connection Below two steps are necessary to reduce the voltage difference between batteries and let the battery system perform the best in series or/ and in parallel. 1. Fully charge the batteries separately. (voltage at rest: ≥13.4V) 2.
- Page 13 3. Connect Batteries Both in Series&Parallel Connect in parallel first, then series. a. Connect the batteries in parallel. b. Connect the paralleled battery systems in series. Step4: Total Input&Output Connection Use two copper bars (instead of battery terminals) to connect all the positive and negative output/input cables, and make sure that the input&output currents of each battery are balanced.
- Page 14 2P4S Battery System 48V(51.2V)200Ah Energy 10,240Wh Max. Continuous Charge/ 200A Discharge Current Max Continuous Load Power 10,240W Tips: It is not recommended to use one terminal as the total positive or negative output/input of the battery system as the connected terminals may heat up or even melt if the total output/input current of the battery system is too high.
-
Page 15: Installation
Create Your Unique Wiring Diagram Plan for your connection ... Share with us your innovative ways to connect batteries INSTALLATION Step 1: Connect the positive terminal of the PV panel to the positive input of the MPPT PV terminal, and the negative terminal to the negative terminal. PV Panel MPPT controller PV Panel... - Page 16 Step 3: Let's use the copper bars to connect the positive terminal of the battery pack to the positive terminal of the MPPT BAT connector and the negative terminal to the negative terminal. PV Panel MPPT controller PV Panel MPPT controller Batteries Inverter Batteries...
-
Page 17: Inverter Setting
INVERTER SETTING Method 1: (Recommend) Select "12V (14.6V) LI (LiFePO ) Mode " Method 2: If method one is not available, select "User Mode" to enter values according to the below parameters. Charge Voltage 14.4V Charging Over Voltage Disconnect Over Voltage Reconnect 14.2V Under Voltage Warning 11.6V... -
Page 18: Recommended Cable Sizing
RECOMMENDED CABLE SIZING Battery cables should be properly sized to handle the expected load. Refer to the table below for amperage ratings for different sizes of copper cables. PVC COPPER CABLE SIZE (2.08) (3.31) (5.25) (8.36) (13.3) (21.1) (33.6) (42.4) (53.5) (67.4) (107) -
Page 19: Battery Charging Mode
LiFePO Battery Charging Mode CC(T1) CV(T2) LiFePO Battery Charging Curve CC (Constant Current) Phase (T1) In the beginning, a discharged battery will be charged with a constant current and voltage will be climbing steadily until reaching the constant voltage setpoint which varies for different charging methods. - Page 20 Solar Panel(s) & Controller Solar Panel Recommended Power: ≥300W The battery can be fully charged in one day (with effective sunshine of 4.5 hours/- day) by 300W solar panels. It may take more than one day to fully charge the battery with＜300W solar panels since the duration and intensity of light would be a great factor for their charging efficiency.
-
Page 21: Troubleshooting
If the battery is not working properly, the following methods can help you solve the general problem quickly. If you are still unable to resolve a possible issue or need any assistance, please contact SIEKON at support-online@siekonenergy.com. Problem Cause Troubleshooting Tips The BMS enters a dormant or protected state. -
Page 22: Warranty Information
WARRANTY INFORMATION Product Name 12.8V 100Ah LiFePO Battery Model RL-LARS2-12.8V100-XXXX For your own reference, we strongly recommend that you fill in and save your order lD and date of purchase. Date of Purchase Order ID If you notice that your product is defective within the specified warranty period, please contact Customer Support via support-online@siekonenergy.com. - Page 23 Brand: SIEKON Product Name: Lithium Iron Phosphate Deep Cycle Battery Model Number: RL-LARS2-12.8V100-XXXX Manufacture: ShenZhenDeChengDianZiShangWuYouXianGongSi Address: 209-211, B dong ,huang pu dong huan lu 378 hao,huang pu she qu,shen zhen,guang dong, 518125, China MADE IN CHINA...
Need help?
Do you have a question about the Classic RL-LARS2-12.8V100 Series and is the answer not in the manual?
Questions and answers