Connecting To Optional Equipment; Connections - Aiwa HV-DH1EH Operating Instructions Manual

Dvd player/stereo video cassette recorder
Table of Contents

Advertisement

Connections (Cont'd)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
Connect this unit's DIGITAL AUDIO OUT jack
1 1
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional coaxial audio cable.
You will need to activate this unit's digital output.
2 2
(See "Digital Audio Output" on page 18).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of this unit
VCR IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEO
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out
R
L
AUDIO INPUT
Amplifier (Receiver)
10
DVD EXCLUSIVE OUT
AUDIO
DIGITAL
OUT
AERIAL
AUDIO OUT
R
COAXIAL
RF.OUT
Pb
L
DVD/VCR
VIDEO OUT
OUT
Digital multi-channel
connection
COAXIAL
DIGITAL INPUT
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– To see the audio format of the current DVD in the On-
Screen Display, press AUDIO.
Accessory Audio/Video (A/V) Connections to
this unit
Connect the AV 3 IN jacks on the unit to the audio/video
out jacks on your accessory component, using the
optional audio/video cables.
POWER
STANDBY/ON
AV3 IN
VIDEO
L – AUDIO – R
DVD
VCR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents