Advertisement
Quick Links
USER'S MANUAL
BATTERYLESS JUMP STARTER
1
8
1
Jumper clamps
3
12V/10A Input Port
5
Glow Switch
7
Voltage indicator
PLEASE SAVE THIS USER'S MANUAL AND READ BEFORE EACH USE.
2
3
2
5V/2A Micro USB Input Port
4
On/Off Switch
6
Condition indicator
8
Cigar plug charging cable
7
6
5
4
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Panther ULCON 12
Summary of Contents for Panther ULCON 12
- Page 1 USER’S MANUAL BATTERYLESS JUMP STARTER Jumper clamps 5V/2A Micro USB Input Port 12V/10A Input Port On/Off Switch Glow Switch Condition indicator Voltage indicator Cigar plug charging cable PLEASE SAVE THIS USER’S MANUAL AND READ BEFORE EACH USE.
- Page 2 General Safety Guide 1. Read vehicle owner’s manual: The vehicle manufacturer may have specific precautions and instructions about jumping your vehicle of which you should be aware of. 2. Please wear safety glasses and gloves while jumping your vehicle. 3. If you are not in a well-ventilated area, please do not attempt to jump start your vehicle.
- Page 3 How to Use The jump starter must be pre-charged before it can be used to jump start your vehicle. The STANDARD MODE instructions will guide you on using your vehicle’s weak battery to pre-charge the jump starter. If your vehicle’s battery is completely discharged, or does not allow you to pre-charge, see 2.ALTERNATIVE PRE-CHARGE METHODS.
- Page 4 3. BYPASS MODE If the STANDARD MODE fails, please use bypass mode. 1. Pre-charge the jump starter, using one of the alternative pre-charge methods. 2. Connect jumps tarter to car as Figure1. 3. To activate bypass mode, press and hold the ON/OFF button until the BYPASS indicator turns on.
Need help?
Do you have a question about the ULCON 12 and is the answer not in the manual?
Questions and answers