Waterdrop WD-PMT User Manual

Pressure Mini Water Tank User Manual
Thanks for choosing us.
Specifications:
Model: WD-PMT
Capacity: 0.26 gallons /1L
Weight: 1.56 lbs /0.71Kg
Components:
1/4" - 1/4" Tee valve
1
3-way quick fitting
2
Ball valve
3
(with sealing washer)
Pressure mini water tank
4
Installation instructions
Step 1. If this mini water tank is connected to a refrigerator, Screw off the refrigerator filter, and then screw on a bypass,
which is adaptive to your refrigerator, to the filter location.
Step 2. Connect 3-way quick fitting, Ball valve, and pressure mini water tank.
Model: WD-PMT
Size: 4.1*4.1*7.3 inches /113.8*113.8*185.5 mm
Working temperature: 41-100°F /5-38°C
1/4" - 1/4" - 1/4" Tee fitting
5
6
1/4" PE tubing
Teflon tape
9
8
10
1/4" Compression hex nut*2
Note: Screw the ball valve onto the storage tank until tight. You don't need to screw the ball valve to the bottom of
screw thread on storage tank.
Step 3. a. Connect the purified water tubing of RO system to ②.
b. Cut the PE tubing at adequate length, and connect ①, ② and faucet to ⑤ separately.
c. Connect the storage tank to refrigerator with the help of ①, ⑧, ⑨, ⑩ and PE tubing of suitable length.
Note: If your water pipe is 3/8", please contact our customer service and let us know if you have PE or metal hose.
Thank you!
Sleeve*2
Step 4. Turn on your water supply valve to fill the tank,and then drain the tank completely. How to drain the storage
tank: turn off the switch of ③ . Press the claw and pull ② off from ③. After that, invert the storage tank into a sink and
Insert*2
turn on the switch of ③. Then you can drain the storage tank. Your tank is now flushed and ready for normal use.
1
Refrigerator joint
POWER
9
10
2
8
6
5
3
Purified water tubing
4
2
3
Refrigerator