Subscribe to Our Youtube Channel
Summary of Contents for Maxtor MS9 Series
- Page 1 INSTALLATION MANUAL MS9 series We reserves the right to improve the product's appearance, size and technology without prior notice. All products sizes and colors are subject to the actual product...
-
Page 2: Care And Maintenance
CARE AND MAINTENANCE WOODEN WALL PREPARATION Make sure LED mirror (or Medicine cabinet) be mounted on the reinforcement plate. Thank you for buying this Aquas Bath products Aquas Bath products are crafted with superior quality standards and workmanship and engineered to stand the test of time. However, that does not mean the product can be neglected and will need some care and cleaning. -
Page 3: Tools Required For Assembly
LED MIRROR INSTALLATION GUIDE TOOLS REQUIRED FOR ASSEMBLY IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following. Electrical Drill 1/8” Drill Bit Pencil READAND FOLLOW ALL DANGER INSTRUCTIONS BEFORE USING THIS MIRROR To reduce the risk of bums, fire , electric shock or WARNING Phillips Screwdriver... -
Page 4: Electric Connections
ELECTRIC CONNECTIONS INSTALLATION INSTRUCTIONS STEP 1 STEP 3 ELECTRIC CONNECTIONS ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN PLACEMENT SUPPORT LOCATION Select the desired position of the mirror. Measure the center of the holes and mark Mark the curve at the top of the mirror. thedrilling locations ensure marking are WARNING: Shut off power before wiring the mirror. -
Page 5: Final Assembly
CLEANING & MAINTENANCE FINAL ASSEMBLY » To maintain the finish on your unit and top, only use a soft cloth, or a weak solution of non-abrasive detergent. How to use Defogger Switch and Dimmer Switch: Do not use cleaners that incorporate isopropyl alcohol. Polymarble tops should only be cleaned with soapy water and a soft cloth.
Need help?
Do you have a question about the MS9 Series and is the answer not in the manual?
Questions and answers