Summary of Contents for Home Decorators Collection BAYBARN TJ-0420M2232GR
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this Vanity.We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your...
Table of Contents Table of Contents..........2 Assembly..............6 Safety Information..........2 1 Pre-drilling holes for anchors..........6 Warranty............3 2 Installing the anchors into the wall........7 Limited lifetime Warranty..........3 3 Tightening screws into the wall...........7 What is Covered..............3 4 Hanging the mirror to the wall..........8 What is not Covered............3 California and Minnesota Residents......3 California residents............3...
Home Decorators Collection products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Home Decorators Collection products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations or call 1-800-986-3460 to receive the replacement item.
Pre-Assembly PLANNING ASSEMBLY Check the mirror for damage before installation. If any part of the mirror is missing or damaged, contact the Customer Service Team at 1-800-986-3460. TOOLS REQUIRED power drill Safety Phillips Level goggles with drill bit. screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size and some of them are pre-installed.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Part code Remark Quantity 0420M2232MI GR/BLU Mirror AC-00839020 Anchor Screw SC-83551331 Touch up pen TP-05100000 GR: Light Grey Touch up pen TP-10100000 BLU: Blue Ash Note: The mirror has 2 finishes: GR: Light Grey, BLU: Blue Ash. Replacement parts will be separated by color in the "Remark"...
Assembly Pre-drilling holes for anchors Measure the dimension between the two metal hooks attached to the mirror. Use a pencil to mark the designed installation location on the wall. Pre-drill Ø8x45mm deep holes for anchors by using a drill. Mirror can be hung in 2 directions 525 mm for vertical, 779 mm for horizontal.
Assembly (continued) Installing the anchors into the wall Install the 2 anchors (AA) provided into the wall. Floor Tightening screws into the wall Insert the two screws (BB) into the anchors (AA). Leave a 1/4 inch space between the screws (BB) and the wall. Floor HOMEDEPOT.COM Please contact 1-800-986-3460 for further assistance.
Need help?
Do you have a question about the BAYBARN TJ-0420M2232GR and is the answer not in the manual?
Questions and answers