Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Madimack ResiSteam MMESGHW-300
- Page 1 Hot Water Installation and Operation Manual...
-
Page 2: Table Of Contents
9.4 QUERY PAGE • One way valve specified by Madimack must be 9.5 Functions and settings Earthing pole of outlet must have a installed near to a cold water outlet;... -
Page 3: General Information
2. GENERAL INFORMATION Compressor: R290, supplied by GMCC. 2.1 SPECIFICATIONS Evaporator: Product Madimack ResiSteam AIO Hot Water Copper tube and aluminum fin type heat exchanger. Model No. MMESGHW-300 Heating Capacity at Air 20°C /15°C, Water Temperature from 15 °C to 55°C... -
Page 4: Orthographic View
3.2 ORTHOGRAPHIC VIEW 3. PARTS NAME and COMPONENTS 3.1 EXPLODED VIEW All the pictures in this manual are for explanation purpose only. It may be slightly different from the heat pump water heater you purchased (depend on the model). Please refer to the real sample instead of the pictures of this manual. Cold water inlet Magnesium anode Electrical heating element... -
Page 5: Transportation
4.2 TRANSPORTATION 5. PIPE LINE CONNECTION 1. During transportation or storage, the heat pump water heater shall be packed in the undamaged 5.1 PIPE LINE INSTALLATION DIAGRAM package to avoid damage to appearance and performance of the product. 2. The heat pump should only be transported in an upright position. -
Page 6: Water Pipe Line Installation Instructions
5.3 WATER PIPE LINE INSTALLATION INSTRUCTIONS 1. Condensate Drain Fit the condensation tube to the connection on left hand side of the unit and run to suitable location. 1. All hot water pipework should be insulated with sealed Polyethylene foamed or equivalent 2. -
Page 7: Electrical Wiring Diagram
6.3 ELECTRICAL WIRING DIAGRAM... -
Page 8: Installation Checklist
7. INSTALLATION CHECKLIST 9. OPERATION Heat pump is installed to ventilation requirements: Operations without water in the tank 9.1 DISPLAY CONTROLLERS may result in damage of the heat pump 1. Pipes are rigid and free of leaks or auxilary heater. Such damage is not 2. -
Page 9: Mode Menu
9.3 MODE menu 9.5 Functions and settings Button Symbol Description Button Symbol Description Press to enter the temp setting page; Press “+” 、 “-”to set the temperature Press to enter the User Para page; (Unable to set in AUTO mode). Press “Return”... -
Page 10: Control Functions
9.6 CONTROL FUNCTIONS 9.6.1 Water temperature control Heating mode 9.6.7 Auto disinfection 9.6.8 Temperature compensation Water temperature control Works when F66=1, the auto disinfection is enabled, Temperature compensation ℃ 1. When F61=0，the units selects temperature compensation Auto disinfection according to ambient temperature and tank temperature If set temperature ＜70℃, the accumulated running automatically；... -
Page 11: Maintenance And Solution
STANDARD CONDITIONS Pool products and provides the following warranties: STATUTORY RIGHTS to clean innertank. LIMITED WARRANTY Madimack warrants that its products are free from defects in materials and manufacture for 12months • • • 1. Reparing the Goods: 10.2 Error & Approaches... -
Page 12: Disposal
12. DISPOSAL Observe all safety and warning information during installation and operation. 12.1 DISPOSAL CONSIDERATIONS The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Need help?
Do you have a question about the ResiSteam MMESGHW-300 and is the answer not in the manual?
Questions and answers