Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ionmax Ray
Summary of Contents for ionmax Ray
- Page 1 Ionmax Ray user manual v1.4. Updated July 2024. Please read the user manual to ensure safe and proper usage. Please read the instructions carefully before using and be sure to keep the user manual where it is easily accessible for future reference.
-
Page 2: Important Safety Instructions
PLEASE NOTE: The user manual may be altered at any time to assist in quality improvement. The design and product development may be upgraded without public notice. Read the user manual carefully before operation. Further information is available in the user manual and service manual. Service personnel are required to read the user manual and service manual carefully before operation. -
Page 3: Product Diagram
● Connect the appliance directly to a suitable outlet. DO NOT use this appliance with an extension cord or outlet strip. To prevent current overload and blown fuses, make sure that no other appliance is plugged into the same outlet or into another outlet wired into the same circuit. ●... -
Page 4: Specifications
Specifications Model: Ionmax ION801 Voltage: 200-240V, 50Hz Power Rating: 200-1200W, 9 level adjustment Timer: 1-9 hour setting, automatic switch-off at 10 hours Heating Elements: 2 far infrared steel coating sheath heaters (Average emissivity over 0.9) Auto Swing: 70° Manual Rotate: 60°... -
Page 5: Control Panel
Control Panel Operating Instructions Place the unit on a flat and stable surface. Note: For safety reasons, the unit will automatically shut itself off when tilted or if it falls over. On/Off Key Connect the power plug to the appropriate electrical socket outlet. The heater is preset to remain switched off after initial connection to a power outlet. - Page 6 Heat Setting There are 9 heat settings. Press the "High" key or "Low" key to increase or decrease the heat level. One or two LEDs will illuminate to indicate the heat setting. Timer Setting By default, the unit will only operate for 10 hours at a time when switched on. When no "TIMER" is set (the timer LEDs are not illuminated), the unit will operate for 10 hours and turn off automatically.
- Page 7 Auto Swing Press the “SETTING” key to select Swing or Stop. The swing angle is 70°. When swinging, the “Swing” LED illuminates. The unit can be manually rotated through 60°. The swing is based on the manually rotated position. Child Lock Press and hold the “SETTING”...
-
Page 8: Maintenance Instructions
Maintenance Instructions Clean the unit's outer surface regularly using a clean, dry cloth when there is dust on the surface. Do not open the grille or clean the insides of the unit. To clean the unit: ● Switch off and unplug the unit. Wait until the unit has completely cooled down. ●... -
Page 9: Troubleshooting Guide
Setting button for 3 seconds. The "Lock" LED will switch off. Please contact Ionmax support if any problem persists. Do not try to repair the unit yourself, as this could cause an electrical shock and void your warranty. -
Page 10: Warranty Details
Warranty Details Congratulations on your purchase! It is our aim to provide you with quality products that you can trust. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. -
Page 11: Warranty Registration
Warranty Registration Register your Ionmax Ray online at my.andatech.com.au or fill out this form and forward it to the address below with a copy of your proof of purchase. Contact us at 1300 800 200 or visit ionmax.com.au for options to extend your warranty.
Need help?
Do you have a question about the Ray and is the answer not in the manual?
Questions and answers