Page 1
Character Arts, LLC. All rights reserved. Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 888-251-1006, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at ascs@lowes.com. Page 1...
Page 2
TABLE OF CONTENTS Package Contents ..........................3 - 4 Assembly Instructions ........................5-16 Operating Instructions ........................Care and Maintenance/Troubleshooting..................SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Warning Risk of injury to persons. Read and understand instruction manual before use. •...
PACKAGE CONTENTS PART DESCRIPTION QUANTITY 1. Metal Base (qty 1) 2. Lower Leg Poles (qty 2) 3. Body with Feet (qty 1) 4. Lower Support Frame (qty 1) 5. Center Support Poles (qty 2) 6. Spine Pole with Control Box and 5.9V 3A adapter (qty 1) 7.
Page 4
PACKAGE CONTENTS E • F • G • H • I • J Page 4...
ASSEMBLY INSTRUCTIONS 1. Snap Lock Lower leg poles into the Metal Base. (Match A to A) (Match B to B) 2. Slide the Body with Feet over the Metal Base with toes pointing towards the FRONT label on the Metal Base. Secure both feet to the brackets on the Metal Base.
Page 6
ASSEMBLY INSTRUCTIONS 5. Snap lock the Upper Support Poles into the Center Support poles and Spine Pole with Control Box. (Match H to H) (Match I to I) (Match J to J) 6. Snap lock the Shoulder and Head frame to the Upper Support Poles.
Page 7
ASSEMBLY INSTRUCTIONS 9. RECOMMENDED TWO PERSON - Lay the assembled frame forward onto the shipping carton and insert four posts of the Center Shoulder wire frame into the Shoulder and Head frame. (Match M1 to M1) HEAD ASSEMBLY 10. Snap lock the Head support frame to the back of the Head. (Match P to P) and (Match Q to Q) 11.
Page 8
ASSEMBLY INSTRUCTIONS 13. REMOVE THE SECURED CLEVIS AND COTTER PIN. Line up the bracket located on the back of the jaw with the motor mount supports. Slide the Clevis and Cotter pin through to secure. Attach the spring to complete the step. COTTER CLEVIS BRACKET...
Page 9
ASSEMBLY INSTRUCTIONS 17. Insert the Upper head support into the Head support frame. Insert all four posts to secure. (Match Q1 to Q1) (Match Q2 to Q2) (Match Q3 to Q3) (Match Q4 to Q4) 18. Secure the Upper Head Support and Head Wire Frame with 6 Reusable Zip Ties. Secure the Head Blister with hook and loop fasteners to the Head Wire Frame.
Page 10
ASSEMBLY INSTRUCTIONS 20. RECOMMENDED TWO PERSON Stand the item back upright to continue assembly. FRONT OF FRAME Insert the posts of the Lower Wire Frame into the Lower Support Frame and Upper Support Poles. (Match C1 to C1) 21. Insert the four posts of the Lower Wire Frame into the Lower Support Frame and Upper Support Poles.
Page 11
ASSEMBLY INSTRUCTIONS 24. Insert the posts of the Chest Wire Frame into the Upper Support Poles. (Match F1 to F1) 25. Insert the posts of the Chest Wire Frame into the Upper Support Poles. (Match G1 to G1) 26. Insert the posts of the Chest Wire Frame into the Upper Support Poles.
Page 12
ASSEMBLY INSTRUCTIONS 28. Insert the posts of the Chest Wire Frame into the Upper Support Poles. (Match J1 to J1) 29. Use 6 reusable zip strips and fasten the Chest Wire Frame on the front and back to secure. FRONT BACK BACK FRONT...
Page 13
ASSEMBLY INSTRUCTIONS 31. Slide the left arm labeled N up the left sleeve. Insert and snap lock the Left arm into the Shoulder and Head frame. (Match N to N) 32. Insert the post of the Left Shoulder Wire Frame into the Shoulder and Head frame.
Page 14
ASSEMBLY INSTRUCTIONS 35. Snap lock the Left Hand with Star to the left Arm. Run the wire down inside the sleeve towards the control box and secure the fabric with hook and loop fastener. (Match T to T) WIRE INSIDE SLEEVE 36.
Page 15
ASSEMBLY INSTRUCTIONS 39. Untie/remove the adapter from the frame. Check that the adapter is secured to the Control Box and plug the adapter into a power source. TETHER LINE SETUP 40. Pull all four tether lines located on the Upper Support Poles from inside the Body and Feet outside the space located under the arm.
Page 16
ASSEMBLY INSTRUCTIONS 41. Insert and snap lock all four Base Support Poles into the Metal Base. (Match V to V) 42. Secure the hook and loop fastener running down the back of the Body and 9 hook and loop fasteners around the neck to to complete your setup.
OPERATING INSTRUCTIONS 1. Move the switch to the ON position for continuous Light Strand activation. Sound or motion will activate the item. Move in front of the item, or make a loud sound (clap) to activate the item. The item will run for one cycle. Adjust Volume control knob as needed.
CARE AND MAINTENANCE • STORE IN A COOL AND DRY ENVIRONMENT. • SURFACE WASHABLE ONLY. DO NOT USE ANY HARSH OR ABRASIVE CLEANING AGENTS. • DESIGNED FOR SEASONAL OPERATION ONLY. • NOT INTENDED FOR CONSTANT OR LONG-TERM USE. • PROPER STORAGE AND USE ARE ESSENTIAL TO THIS ITEM’S LONGEVITY. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE...
Need help?
Do you have a question about the RUDOLPF 93119 and is the answer not in the manual?
Questions and answers