Advertisement
Quick Links
CAUTION!
Proper Charging is Crucial! Charge before initial use!
Be sure to read the Instruction Sheet for full instructions.
Proper Charging is crucial to the life of your Sundown Audio ULTRACAP Module. It is very important that the temperature of the Ultracapacitor Module remains cool.
TEMPERATURE SPECIFICATIONS
Range, Operational Temp.
Range, Storage
Do Not Over-tighten SuperBANK Terminals!
Whether using the automotive post adaptors, bolts or screws, the tightening torque
should never exceed 8 ft-lbs max on any Sundown Audio ULTRACAP Module!
PROP 65 WARNING:
defects or other reproductive harm. Wash hands after handling.
For more information, visit
Safety
Never touch the power terminals as any residual voltage can cause fatal electrical
shocks. Always check with a calibrated meter that the ULTRACAP Module is discharged
prior to handling the ULTRACAP Module, please see the step by step instructions in this
manual for the discharge procedure.
Carefully observe the polarity each time you connect to it, DO NOT REVERSE POLARITY.
Prior to installation or removal the ULTRACAP Module must be properly discharged.
Provide sufficient electrical isolation for operation above 50VDC (relative to ground).
Protect surrounding electrical and conductive components from incidental contact.
Do not operate above specified voltage or temperature range.
Do not touch terminals while charged, serious burns, shock or material fusing may occur.
Unpacking
Please inspect the shipping carton for signs of damage prior to unpacking the carton. Report
any damage to the carton, or the contents, to the carrier immediately. Retain all shipping
materials until the ULTRACAP Module is fully inspected and determined to be operational.
Do not use the terminals to lift the ULTRACAP Module out of the package. If any parts are
determined to be missing or defective an RGA number must be issued prior to returning
the unit for repair or replacement. Please contact your salesperson or distributor to
request an RGA number.
SUNDOWN AUDIO
o
o
o
-104
F to 149
F / -40
C to 65
o
o
o
-104
F to 158
F / -40
C to 70
This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth
www.P65Warnings.ca.gov
514 W 21ST NEWTON, NC 28658
PLEASE READ!
o
C
o
C
SA150-975
828.459.1980
Advertisement
Summary of Contents for Sundown Audio SA150-975
- Page 1 Proper Charging is Crucial! Charge before initial use! Be sure to read the Instruction Sheet for full instructions. Proper Charging is crucial to the life of your Sundown Audio ULTRACAP Module. It is very important that the temperature of the Ultracapacitor Module remains cool. TEMPERATURE SPECIFICATIONS Range, Operational Temp.
- Page 2 ULTRACAP Modules in potentially corrosive environments and direct water splash or spray should be avoided. In all environments the best possible performance is aided by using an anti-oxidation agent for all terminal connections. SA150-975 Careful design consideration should be given to the application to prevent the overheating of the ULTRACAP Modules.
Need help?
Do you have a question about the SA150-975 and is the answer not in the manual?
Questions and answers