Advertisement
Quick Links
Advertisement
Summary of Contents for ZAHNER MODA
- Page 1 MODA | Installation Manual...
-
Page 2: Product Overview
PRODUCT OVERVIEW Create lasting and enduring spaces with this wall-mounted, modular and re-configurable metal panel system from Zahner. MODA is a series of lightweight metal panels that are available in four standard sizes and a variety of material and surface options. -
Page 3: Recommended Tools And Equipment
Read this manual. We've done this before, and know how to do it right. There's no need to learn the hard way! • Examine each item carefully to ensure that the item quantity, size, material, finish, and quality matches the order specifications. In the event any discrepancies are found, STOP and contact the Zahner Product team at 816-423-8280 before proceeding. •... - Page 4 Review the MODA detail set, and make note of the recommended minimum distance from the floor and ceiling. Detail 2 Use a mounting slot in the MODA hardware as a location for a reference horizontal line. Mark this line across the entire scope of the installation. mounting slot Evaluate your wall for plumb and flatness across the scope of your project.
- Page 5 If your project does not require Outside Corners, skip to the next section. Detail 4 Place the MODA corner bracket against the wall as shown. Use a level to confirm the bracket is Detail 5 vertical. Shim if necessary. Mark the hole centers through the diamond-shaped openings in the hardware.
- Page 6 Adjust the position of the bracket. Use a level to confirm the bracket is vertical in both directions. Detail 5 Shim the bracket if necessary. Confirm proper alignment with adjacent wall using a c-channel. Tighten all fasteners. MODA Panel System | Installation Manual | August 26, 2024 Page 6 of 16...
- Page 7 2 Install Brackets for Outside Corners (con't) Install the adjacent c-channels. Repeat as needed until all Outside Corners Brackets for your project are mounted. Detail 4 Detail 5 MODA Panel System | Installation Manual | August 26, 2024 Page 7 of 16...
- Page 8 Tune the position of the brackets. Use a level to ensure the brackets are vertical and plumb. Shim the brackets if necessary. Ensure that any vertically stacked brackets are properly spaced and remain aligned. Tighten all fasteners. MODA Panel System | Installation Manual | August 26, 2024 Page 8 of 16...
- Page 9 Tune the position of the brackets. Use a level to ensure the brackets are vertical and plumb. Shim the brackets if necessary. Ensure that any vertically stacked brackets are properly spaced and remain aligned. Tighten all fasteners. MODA Panel System | Installation Manual | August 26, 2024 Page 9 of 16...
- Page 10 Position the c-brackets between the end brackets. Use a level to ensure the c-channels are aligned with true vertical, then mark the hole centers through the fastener slots in the hardware. Mount the Detail 1 Detail 6 c-channels to the wall. MODA Panel System | Installation Manual | August 26, 2024 Page 10 of 16...
- Page 11 Check hardware positions and alignment Before proceeding with the installation of the reveal covers and panels, Zahner recommends completing the following checklist to ensure that all MODA hardware is installed straight, level and plumb, with correct alignment and spacing. Hardware brackets are aligned with a common horizontal.
- Page 12 Check hardware positions and alignment (con't) Before proceeding with the installation of the reveal covers and panels, Zahner recommends completing the following checklist to ensure that all MODA hardware is installed straight, level and plumb, with correct alignment and spacing.
- Page 13 If your project does not require Reveal Covers, skip to the next section. Locate the c-channels in your project that require concealment. Lift the reveal cover into position, insert onto hooks of the c-channel and drop into place. MODA Panel System | Installation Manual | August 26, 2024 Page 13 of 16...
- Page 14 7 Install Panels Changing Panel Configuration Detail 4 MODA panels ship from the factory in configuration A. Reference the MODA detail set Detail 5 to see if your project requires panels in the B, C, or D configuration. If your project does not require changing the panel configuration, skip to the next step.
- Page 15 Install Panels (con't) Make sure the MODA panels are oriented with one of the arrows on the back panel pointing upward. Align the back panel slots with the bracket mounting hooks, place the panel onto the hooks, and drop the panel into place.
Need help?
Do you have a question about the MODA and is the answer not in the manual?
Questions and answers