Advertisement
Bluetooth
®
No wires for handsfree access – headsets and in-car Headset
• The headset must be charged for two hours prior to starting
• The headset must be paired with the phone before it can be used.
Please see the Bluetooth Pairing Instructions that came with the headset
• Bluetooth must be turned On in the phone (see the following steps)
Turn Bluetooth Power On in Phone
• The phone's Bluetooth feature is off by default
• Press M > Settings > Connection > Bluetooth Link > Setup > scroll to Power:
> Press Change and Select On
Pair with Headset
• Press the headset call button for 6 to 10 seconds until blue indicator light comes on.
Follow the remainder of the Bluetooth Pairing instructions that came with the device.
Note: Set up instructions may vary by Bluetooth headset. Check your users manual for
more detailed instructions.
• On the phone press M > Settings > Connection > Bluetooth Link > Handsfree >
Look for Devices
• If Scan Results are successful, scroll and Select your device > Yes to pair
• Enter the pass key of "0000" and press OK
Note: When the headset is successfully paired with the phone, the blue indicator light
changes from steady to flashing.
Advertisement
