Advertisement
Quick Links
CBL-561 Quick Guide
The Radioddity CBL-561 antenna comes with:
① Lower part with built-in PL-259 plug, lower metal rod with extension coil (total
mechanical length 44.5 cm / 17.5 in)
② Silver extension radial (fixed length of 32 cm / 12.6 inch)
③ Top radial with a variable active length between 2.5 cm / 1 inch and 72.5cm / 28.54 inch
④ 2mm Allen-key (required to loosen/fasten the fixing part of the top radial)
①
②
③
④
1
Advertisement
Related Manuals for Radioddity CBL-561
Summary of Contents for Radioddity CBL-561
- Page 1 CBL-561 Quick Guide The Radioddity CBL-561 antenna comes with: ① Lower part with built-in PL-259 plug, lower metal rod with extension coil (total mechanical length 44.5 cm / 17.5 in) ② Silver extension radial (fixed length of 32 cm / 12.6 inch) ③...
- Page 2 How to setup the antenna for use of a specific band: 1. Release the grub-screw of the fixing part (just a little turn counterclockwise) to align the length of the top radial. 2. Tighten the grub screw of the fixing part (by turning the grub screw clockwise). Required length of the top radial (measured from top of fixing part to top of radial): l/mm length of top radial vs frequency...
Need help?
Do you have a question about the CBL-561 and is the answer not in the manual?
Questions and answers