Subscribe to Our Youtube Channel
Related Manuals for SafeTrx ZEMBRO WANDER ALERT
Summary of Contents for SafeTrx ZEMBRO WANDER ALERT
- Page 1 ZEMBRO WANDER ALERT USER MANUAL mSafety from Sony Watch Peace of mind with connected health & safety zembro.com...
- Page 2 Zembro Wander Alert Wander Alert is a wristwatch featuring indoor and outdoor tracking with automatic alerting in case of a wearer straying too far from home, plus an emergency alert button for manually raising an alert. FEATURES Automatic outdoor tracking with high...
- Page 3 The Zembro Wander Alert Watch Your Wander Alert wearable is based on the mSafety from Sony, an ex- tremely light, comfortable, and long-lasting watch that features an in- built SIM card so it stays connected to Zembro when you are indoors and outdoors.
-
Page 4: Wearing The Watch
Wearing the Watch The watch strap is specially designed to be strong but soft on skin. We recommend you wear it fastened as tightly as is comfortable, on ei- ther wrist, and that you close the buckle, put the loose end of the strap through the keeper, and pin the end of the loose end into the holes in the strap (it should click softly). - Page 5 Screen The home screen shows the time, date, the SOS alerting button, and the Zembro logo. There are icons on top to show network signal strength, connection to Zembro (a cloud), a Bluetooth icon if you have a Zembro beacon (see below), a GPS pin when you are alerting, and a battery level.
- Page 6 Screen The battery screen is seen by pressing the top right button, and shows the battery level and your name. The alert screen is seen when you press the SOS button for five seconds, which sends an alert to your caregivers. This screen shows the alert, the watch beeps and vibrates, and the same button is now marked “Stop”.
- Page 7 Recharging In normal use, your battery typically lasts several days, but as recharg- ing only takes 45 minutes we recommend you charge daily to ensure you have plenty of battery for when you alert. This is important because while alerting your watch uses more battery, because the watch looks for GPS to help your contacts and carers find you quickly.
- Page 8 Recharging To charge your watch just pop it on its base as indicated. When placed correctly a magnet will keep the watch securely in place, and the battery symbol indicates it is charging. Charging pins...
-
Page 9: Switching Off
Switching On To switch on your watch, either place it on its charger, or press the bot- tom right button until you feel a slight vibration. Press the bottom right button until you feel a slight vibration. Switching Off You cannot switch off your watch, it will switch off when battery runs out. - Page 10 The Buttons The watch features three buttons. Press the top left button to illuminate Press the top right the screen. button to see battery The screen times out level, and again to after 10 seconds, to return to the save battery. watch face.
-
Page 11: Screen Settings
Screen Settings Your watch may light up and show you the time when you swivel your wrist to look at it. This is called ‘gesture’ and may be configured by Zembro. Else you can press any button to see the screen. The screen is set for medium brightness and alerts cause a beep sound and a buzzing vibration. - Page 12 How Alerting Works Your device functions primarily as a watch, but also has very advanced alerting. To raise an alert, press the bottom right button (marked SOS on the screen) for a long period of time (5 seconds). The screen changes from Zembro to Alert, and immediately notifies your emergency contacts that you have alerted.
- Page 13 How Alerting Works The watch remains in contact with your indoor beacons, which must be placed carefully around your residence (see below). When you go out of range of your beacons, your watch automatically switches to get its location from GPS satellites. If you then go outside your safety zone which has been defined around your address, your watch will automatically alert and contact your car- ers with your position, which is updated every minute.
- Page 14 How Alerting Works When alerting, your contacts can send you a message, which will ap- pear on the screen. To respond, press the buttons for Yes or No answers. To cancel an alert, just press the alert button again for 5 seconds. Press for “No”...
- Page 15 Installing a Beacon The Zembro beacons allow your contacts to see that you are at home. Zembro beacons are small battery-operated devices that emit a small Bluetooth signal that is harmless but can be ‘heard’ by the watch. As long as the watch is in contact with one of your beacons, it knows you are at home.
-
Page 16: Safety Zone
Safety Zone A safety zone is included in your Wander Alert to reassure you that if you are at risk of getting lost you can be found quickly by your trusted contacts. Your safety zone is an area outside your home where you can go nor- mally, but if you go further away your contacts are alerted and can find you. - Page 17 Installing a Beacon Beacons normally ship already switched on. After approximately two years, you should change the battery. TO CHANGE THE BATTERY: • Unscrew the beacon to open it. • Remove small foam piece that protects the battery • Then push out the coin cell battery with a small plastic or wooden implement (eg: a toothpick).
- Page 18 Updates From time to time your watch may receive con- figuration updates from Zembro. You will see a message on the watch face saying Updating Config. This happens automatically, and usually takes less than one minute, then restarts itself. There may also be major updates from time to time to load new software.
-
Page 19: Network Connection
Network Connection If you switch on your watch in an area with poor cellular network, you will see a “Connecting” screen. This should disappear after a few mo- ments, but if it does not, then contact Zembro cus- tomer services. Sometimes, if you are in an area with poor cellular network strength, when you switch on your watch you may see a screen that says “Connecting”... -
Page 20: Receiving An Alert
We recommend that you test the alert service when first using a new Zembro Wander Alert watch, and save to your favou- rites the number that calls and texts you, to ensure it can override any do-not-disturb or silent mode that you may set on your phone (e.g. -
Page 21: Caring For Your Device
If you need to change a contact, add or delete a contact number, please contact Zembro customer service. Thank you for choosing the Zembro Wander Alert bracelet. We wish you many years of protection and peace of mind. Do not hesitate to contact our customer service if you have queries or problems.
Need help?
Do you have a question about the ZEMBRO WANDER ALERT and is the answer not in the manual?
Questions and answers