Life MST040 Quick Start Manual

4-step swim spa step

Hide thumbs

page of 4

/ 4
Bookmarks

Quick Links

Download this manual

OPTION 1

Fix the 4 protective stickers (j) at the back of the steps to avoid damaging your spa.

Fixez les 4 autocollants de protection (j) à l'arrière de la marche pour éviter d'endommager votre spa.

OPTION 2

Fix the 4 protective stickers (j) at the side of the steps to avoid damaging your spa.

Fixez les 4 autocollants de protection (j) au bord des marches pour éviter d'endommager votre spa.

SET OF 4 FRONT COVER PLATE ADD-ONS

Install the cover plate and side plate (sold separately).

Installez les contre-marches et les plaques de finition latérales (vendues séparément).

2 sheets of A3 paper double-sided printing in black color

SIDE PLATE ADD-ON

4-STEP SWIM SPA STEP

WARNING!

Read the user manual to become familiar with the features of this product before operating. It must be operated with caution and common sense, and requires some

basic mechanical ability. Failure to operate this product in a safe and responsible manner could cause serious injury, damage to the product or other property.

This product is not intended for use by children without direct adult supervision.

ATTENTION!

Lisez le manuel de l'utilisateur pour vous familiariser avec les fonctionnalités de ce produit avant de l'utiliser. Il doit être utilisé avec prudence et bon sens, et nécessite

certaines capacités mécaniques de base. Le fait de ne pas utiliser ce produit de manière sûre et responsable peut entraîner des blessures graves, des dommages au

produit ou à d'autres biens. Ce produit n'est pas destiné à être utilisé par des enfants sans la surveillance directe d'un adulte.

AUSTRALIA AND NEW ZEALAND - EQUIPOTENTIAL BONDING COMPLIANCE OBLIGATION

This product is subject to Equipotential Bonding compliance in accordance with the Australian and New Zealand Standards (AS/NZS 3000: 2018 Electrical Installations)

otherwise known as the Wiring Rules. If this product is installed within arms reach of a body of water including spa, swim spa or pool, then Equipotential Bonding MUST be

performed by a licensed electrical person prior to the product being used. This is a mandatory requirement. As the purchaser of this product, you are responsible for ensuring

compliance with this requirement at your own expense.

MST040

Need help?

Do you have a question about the MST040 and is the answer not in the manual?

Questions and answers

Summary of Contents for Life MST040

Page 1 This is a mandatory requirement. As the purchaser of this product, you are responsible for ensuring compliance with this requirement at your own expense. Installez les contre-marches et les plaques de finition latérales (vendues séparément). MST040 2 sheets of A3 paper double-sided printing in black color...
Page 2 PARTS / PIÈCES Mounting plate Tools not included but recommended: Power Drill and Screw Driver. / Outils non inclus mais recommandés : perceuse électrique et tournevis. Plaque d’ancrage Bracket Équerre Rubber bumper Pare-chocs en caoutchouc Leveling leg Fix both handrails together using the mounting plate (S), the screws, washer and the nuts (b-d). Patte nivelante DON'T OVER TIGHTEN NUTS.
Page 3 Step Marche Bracket Équerre Fix the back handrail to the steps. First at the back with screws, washers and nuts (a-d). DON'T OVER TIGHTEN NUTS. Then on the top with screws (i). Insert the caps (f) in the remaining holes at the back. Fixez la rampe arrière aux marches.
Page 4 Assemble the side handrail with parts (K-L-M) and screws (g). Hook Assemblez la rampe de côté avec les pièces (K-L-M) et les vis (g). Crochet Assemble the end rail with parts (N-O-P-Q) and screws (g). Then install the 6 hooks (R) with screws (g) on the part (N). Assemblez la rampe arrière avec les pièces (N-O-P-Q) et les vis (g).