1. Manuals
  2. Brands
  3. Lex Manuals
  4. PCI Card
  5. 3I610BW
  6. Manual

Lex 3I610BW Manual

Intel skylake-u/kaby lake-u core i cpu, ddr4 2133 mt/s sodimm, 3 x lan/hdmi/usb/com/pcie mini card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3I610BW/HW
Intel Skylake-U / Kaby Lake-U Core i CPU,
DDR4 2133 MT/s SODIMM, 3 x LAN / HDMI / USB /
COM / PCIe mini card
All wafer IO
Intel Skylake-U / Kaby Lake-U Core i CPU,
3 x Intel GbE LAN, 2 x PCIe mini card slots, HDMI, LVDS, Touch Screen
7 x USB, 6 x COM, Wide Range DC-IN, Battery Charger function
NO. 3I610BW/HW
Release date: Aug. 01. 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3I610BW and is the answer not in the manual?

Questions and answers

Related Manuals for Lex 3I610BW

Summary of Contents for Lex 3I610BW

  • Page 1 Intel Skylake-U / Kaby Lake-U Core i CPU, 3 x Intel GbE LAN, 2 x PCIe mini card slots, HDMI, LVDS, Touch Screen 7 x USB, 6 x COM, Wide Range DC-IN, Battery Charger function NO. 3I610BW/HW Release date: Aug. 01. 2018...

  • Page 2: Table Of Contents

    1-5 PACKING LIST ........................CHAPTER 2 HARDWARE INSTALLATION ................2-1 UNPACKING PRECAUTION ....................2-2 UNPACKING CHECKUP ...................... 2-3 DIMENSION-3I610BW/HW ....................2-4-1 LAYOUT-3I610BW/HW-FUNCTION MAP-TOP ..............2-4-2 LAYOUT-3I610BW/HW-FUNCTION MAP-BOT ..............2-5 FUNCTION MAP-33I610BW/HW ..................2-6-1 CONNECTOR MAP-3I610BW/HW-TOP ................2-6-2 CONNECTOR MAP-3I610BW/HW-BOT ................
  • Page 3 3-12 CPP1: PANEL INVERTER POWER CONNECTOR 1x5 pin (2.00mm) WAFER CONNECTOR 3-13 CT1: USB TOUCH SCREEN DEVICE 2x5 pin (2.00mm) WAFER CONNECTOR..... 3-14 CU3/CU31/CU4/CU41: USB 3.0/2.0 1x5pin + 1x4pin (1.25mm) WAFER CONNECTOR..3-15 LAN INTERFACE........................ 3-16 DIO INTERFACE......................... 3-16-1 IO DEVICE: F75111 UNDER DOS .................. 3-16-2 IO DEVICE: F75111 UNDER WINDOWS ................
  • Page 4 4-6-5-1 HARDWARE MONITOR ....................4-6-6 CONSOLE REDIRECTION ....................4-7 SECURITY ........................... 4-8 POWER ..........................4-9 BOOT ........................... 4-10 EXIT ........................... CHAPTER 5 DRIVER INSTALLATION ................... 5-1 INF INSTALL INTEL SKYLAKE KABY LAKE CHIPSET DRIVER ........5-2 VGA INSTALL INTEL SKYLAKE & KABY LAKE VGA DRIVER ..........5-3 HD AUDIO INSTALL HIGH DEFINITION AUDIO DRIVER ...........
  • Page 5 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 6: Warning

    Warning ! 1. Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 7: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 8 Photo 1 Insert Unplug...

  • Page 9: Chapter 1 General Information

    All wafer IO design offers superb performance and PC specifi cation in the industry using the specifi c housing. Please kindly contact LEX (info@lex.com.tw) if you have any further query or want to get the detail information.

  • Page 10: Major Feature

    1-1 Major Feature 1. Intel® Celeron 3955U Processor 2.0GHz, (Dual core), Intel® Core i5-6200U Processor 2.3GHz / 2.8GHz (Dual core), Intel® Core i7-6600U Processor 2.6GHz / 3.4GHz (Dual core) 2. Intel 9th generation (Gen 9) LP graphics and media encode/decode engine, Intel® Celeron 3955U 300MHz / 900MHz, Intel®...

  • Page 11: Specification

    1-2 Specifi cation SOC: Intel® Celeron 3955U Processor 2.0GHz, (Dual core), Intel® Core i5-6200U Processor 2.3GHz / 2.8GHz (Dual core), Intel® Core i7-6600U Processor 2.6GHz / 3.4GHz (Dual core) Memory: DDR4 SODIMM slot x 2, up to 32GB Graphics: Intel 9th generation (Gen 9) LP graphics and media encode/decode engine, Intel®...

  • Page 12: Installing The So-Dimm

    1-3 Installing the SO-DIMM 1. Align the SO-DIMM with the connector at a 45 degree angle. 2. Press the SO-DIMM into the connector until you hear a click.
  • Page 13 Notices: 1.The connectors are designed to ensure the correct insertion. If you feel resistance, check t h e connectors & golden fi nger direction, and realign the card. 2. Make sure the retaining clips (on two sides of the slot) lock onto the notches of the card fi...

  • Page 14: Removing The So-Dimm

    1-3-1-1 Removing the SO-DIMM 1. Release the SO-DIMM by pulling outward the two retaining clips and the SO-DIMM pops up slightly. 2. Lift the SO-DIMM out of its connector carefully.

  • Page 15: Installing The Mini Pci-E Card (Full Size)

    1-4 Installing the Mini PCI-e Card (Full Size) 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 16: Packing List

    1-5 Packing List Material Code Description Detail Specifi cation Quantit 6G6003-7350-0100 Power Cable LF, 2.0 2*4/DC JK,L=9cm 6G6003-1009-0100 SATA Power Cable LF,L=25cm,1*4/2.0 to 180° SATA 15p 6G6001-2203-0100 SATA DATA Cable (Red) LF,L=25cm 6G8006-2350-0100 DVD LF, Support Apollo Lake/Skylake ■60W Power 6G5212-0620-0100 LF,L Type,FSP060-DIBAN2,FSP Adapter,12V/5A,2.5Ø...

  • Page 17: Chapter 2 Hardware Installation

    Chapter-2 Hardware Installation 2-1 Unpacking Precaution This chapter provides the information how to install the hardware of 3I610BW/HW. 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. NOTE! 1. Do not touch the board or any other sensitive components without all necessary anti-static protection.

  • Page 18: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 3I610BW/HW from electricity discharge. With reference to section 1-5 please check the delivery package again with following steps: 1. Unpack the 3I610BW/HW board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 19: Dimension-3I610Bw/Hw

    2-3 Dimension-3I610BW/HW...

  • Page 20: Layout-3I610Bw/Hw-Function Map-Top

    2-4-1 Layout-3I610BW/HW-Function Map Line-in/Line-out/Mic-in CMOS Data Clear USB2.0 4DIO Audio AMP 3V Battery In Front Panel LAN1 LED PS2 KB/MS LAN1 COM5 LAN2 LED COM6 LAN2 COM3 LAN3 LED COM4 LAN3 COM1 USB2.0 mSATA/PCIe/ COM2 COM1 Pin9 Select USB/SMBUS USB3.0...

  • Page 21: Layout-3I610Bw/Hw-Function Map-Bot

    2-4-2 Layout-3I610BW/HW-Function Map SATA2 SATA1...

  • Page 22: Function Map-33I610Bw/Hw

    2-5 Function Map-3I610BW/HW Line-in/Line-out CMOS Data Clear /Mic-in USB2.0 16DIO Audio AMP Front Panel LAN1 LED PS2 KB/MS LAN1 COM6 LAN2 LED COM5 LAN2 COM4 LAN3 LED LAN3 COM3 COM2 USB 2.0 COM1 USB 3.0 +12V/+5V Output USB 2.0 SMBUS...

  • Page 23: Connector Map-3I610Bw/Hw-Top

    2-6-1 Connector MAP-3I610BW/HW CU10 CIO2 CIO3 JSB1 CALR1 CIO1 CIO4 CBT1 CFP1 CL11 CKM1 CL21 CL31 CU41 CU31 JVC1 MPCE1 JVC2 CU21 CPO1 MPCE2 JVL1 JVP1 CPP1 SODIM2 FAN1 JSB3(OEM) SODIM1 CPI1 JSE4 CBAT2 JSE1 JSE3 COS1(OEM) CBAT1(OEM) JSE2...

  • Page 24: Connector Map-3I610Bw/Hw-Bot

    2-6-2 Connector MAP-3I610BW/HW SATA2 SATA1...

  • Page 25: Diagram-3I610Bw/Hw-Top

    2-7-1 Diagram-3I610BW/HW JSB1 CU10 CIO2 CIO3 CALR1 CIO1 CIO4 CBT1 CFP1 CL11 CKM1 CL21 CL31 CU41 CU31 JVC1 MPCE1 JVC2 CU21 CPO1 MPCE2 USB Touch JVL1 JVP1 CPP1 SODIM2 FAN1 SODIM1 JSB3(OEM) CPI1 JSE4 CBAT2 JSE1 JSE3 COS1(OEM) CBAT1(OEM) JSE2...

  • Page 26: Diagram-3I610Bw/Hw-Bot

    2-7-2 Diagram-3I610BW/HW SATA2 SATA1...

  • Page 27: List Of Jumpers

    2-8 List of Jumpers JSB1: CMOS DATA Clear JVL1: LCD panel power select JVP1: LVDS panel Inverter power select JVC1/2: COM1/2 PIN9 RI/+12V/+5V Select 2-9 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap.

  • Page 28: Jsb1: Coms Data Clear

    2-10 JSB1: CMOS DATA Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JSB2 to store the CMOS data. To clear the CMOS, follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 29: Jvl1: Lcd Panel Power Select

    2-11 JVL1: LCD panel power select JVL1 DESCRIPTION *2-3 +3.3V Note: Attention ! Check Device Power in spec JVL1 *+3.3V 2-12 JVP1: LVDS panel Inverter power select JVP1 DESCRIPTION +12V *2-3 Note: Attention ! Check Device Power in spec JVP1 *+5V +12V...

  • Page 30: Jvc1/2: Com1/2 Pin9 Ri/+12V/+5V Select

    2-13 JVC1/JVC2: COM1/2 PIN9 RI/+12V/+5V Select JVC1/JVC2 DESCRIPTION *1-2 COM port pin9 use RI signal COM port pin9 use +5V voltage COM port pin9 use +12V voltage Note: Attention ! Check Device Power in spec JVC1 JVC2 *RI Signal 1 3 5 1 3 5 1 3 5 1 3 5...

  • Page 31: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CPI1: DC 12V-IN 2x4 pin (2.00mm) Red wafer CBAT2: Battery charge In 2x5 pin (2.00mm) wafer JSE1: Battery Output LED 1x2 pin (2.00mm) Pin Header JSE2:...

  • Page 32: Cpi1: Dc Power Input (2X4Pin 2.00Mm Wafer) (Red)

    3-2 CPI1: DC Power input (2x4pin 2.00mm Wafer) (Red) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DC-IN DC-IN DC-IN DC-IN Note: Very important check DC-in Voltage CPI1 pin1 3-3 CBAT2: Battery charge In 2x5 pin (2.00mm) wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION BAT VCC BAT VCC...

  • Page 33: Jse1: Battery Output Led 1X2 Pin (2.00Mm) Pin Header

    3-4 JSE1: Battery Output LED 1x2 pin (2.00mm) Pin Header PIN NO. DESCRIPTION PIN NO. DESCRIPTION LED + LED - 3-5 JSE2: Battery Discharge LED 1x2 pin (2.00mm) Pin Header PIN NO. DESCRIPTION PIN NO. DESCRIPTION LED + LED - 3-6 JSE3: Battery charged LED 1x2 pin (2.00mm) Pin Header PIN NO.

  • Page 34: Cg1: Vga 2X5 Pin (2.00Mm) Wafer

    3-8 CG1: VGA 2x5 pin (2.00mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION BULE DDC CLOCK GREEN V-SYNC H-SYNC DDC DATA pin1 3-9 FAN1: CPU Fan 1x3 pin (2.54mm) wafer connector PIN NO. DESCRIPTION +12V FAN speed detect Note: DC in +12V by switch to FAN power +12V, so DC in need stable +12V input FAN1 pin1...

  • Page 35: Hdmi1: Hdmi 2X10 Pin (1.25Mm) Wafer Connector

    3-10 HDMI1: HDMI 2x10 pin (1.25mm) wafer connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION TMDS_D2_N TMDS_D2_P TMDS_D1_N TMDS_D1_P TMDS_D0_N TMDS_D0_P TMDS_CLK_N TMDS_CLK_P CLOCK DATA Hot Plug Detect ot Plug Detect Note: 1. Can use CN040 connector Board to HDMI Type A HDMI1 pin1...

  • Page 36: Lvds1: Lvds 2X15 Pin (1.25Mm) Wafer Connector

    3-11 LVDS1: LVDS 2x15 pin (1.25mm) wafer connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION PWM dimming +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA3+ Channel-0-DATA3+ Channel-1-DATA3- Channel-0-DATA3- Channel-0-DATA2+ Channel-0-CLK+ Channel-0-DATA2- Channel-0-CLK- Channel-0-DATA1+ Channel-0-DATA0+ Channel-0-DATA1- Channel-0-DATA0- +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA2+ Channel-1-CLK+ Channel-1-DATA2-...

  • Page 37: Cpp1: Panel Inverter Power Connector 1X5 Pin (2.00Mm) Wafer Connector

    3-12 CPP1: Panel inverter power connector 1x5 pin (2.00mm) wafer connector PIN NO. DESCRIPTION +12V PWM dimming ENBKL (3.3V) ENBKL (5V) Note: 1. CPP1 PIN 3 and LVDS1 PIN1 is same signal. CPP1 pin1...

  • Page 38: Ct1: Usb Touch Screen Device 2X5 Pin (2.00Mm) Wafer Connector

    3-13 CT1: USB Touch screen device 2x5 pin (2.00mm) Wafer connector For 8-wire type pin defi ne PIN NO. DESCRIPTION PIN NO. DESCRIPTION Bottom Bottom Sense Top Sense Right Right Sense Left Left Sense Note: For eight wire type cable Pin 3 and Pin4 need short. For 4-wire type pin defi...

  • Page 39: Cu3/Cu31/Cu4/Cu41: Usb 3.0/2.0 1X5Pin + 1X4Pin (1.25Mm) Wafer Connector

    3-14 CU3/CU31/CU4/CU41: USB 3.0/2.0 1x5pin + 1x4pin (1.25mm) wafer connector PIN NO. CU31/CU41(1x4pin 1.25mm) PIN NO. CU3/CU4(1x4pin 1.25mm) USB3.0 TX+ USB 2.0 D- USB3.0 TX- USB 2.0 D+ USB3.0 RX+ USB3.0 RX- Note: 1. Can use UB004 connector Board to USB 3.0 Type A CU31 CU41...

  • Page 40: Lan Interface

    3-15 LAN Interface CL1/CL2/CL3: LAN 2x4 pin (2.00mm) wafer connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION MDI0- MDI0+ MDI2+ MDI1+ MDI1- MDI2- MDI2- MDI3- MDI3+ MDI3+ Note: Can use CL001 connector Board to RJ45 pin1 pin1 pin1 CL11/CL21/CL31: LAN LED 1x4 pin (1.25mm) wafer connector mm) wafer connector PIN NO.

  • Page 41: Dio Interface

    3-16 DIO Interface CIO1: 4DI/4DO 2x5 pin (2.00mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION DI-0 DO-3 DI-1 DO-2 DI-2 DO-1 DI-3 DO-0 CIO2: 4DI/4DO 2x5 pin (2.00mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION DI-4 DO-7 DI-5 DO-6 DI-6 DO-5 DI-7 DO-4...
  • Page 42 For F75111N I C watch dog timer device: DC spec: Input low Voltage (VIL) \ +0.8 Max Input High Voltage (VIH): +2V Min Output low Current (IOL): 10mA (Min) VOL=0.4V Output High Current (IOH): -10mA (Min) VOH=2.4V Watch Dog Time value 0~255 sec The system will be issued reset.

  • Page 43: Io Device: F75111 Under Dos

    3-16-1 IO Device: F75111 under DOS The Sample code source you can download from Source fi le: F75111_Dos_Src.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Binary fi le: F75111_Dos_Bin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE" binary fi le 3.Input 1 to Enable WDT timer or input 0 to Disable it.
  • Page 44 Introduction How to use this Demo Application WriteI2CByte(I2CADDR, CONFIG, 0x03);//Set Watch Dog Timer function WriteI2CByte(I2CADDR, WDT_TIMER, timer);//Set Watch Dog Timer range from 0-255. WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x73);//Enable Watch Dog Timer in second and pulse mode How to use this Demo Application WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x00);...

  • Page 45: Io Device: F75111 Under Windows

    3-16-2 IO Device: F75111 under Windows The Sample code source you can download from Source fi le: F75111_DIO_Src_v2.8W(32bit).zip http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary fi le: F75111_DIO_Bin_v2.8W(32bit).zip USERNAME & PASSWORD: sf We do the demo test with a test tool which DIx connect to DOx with Relay.
  • Page 46 How to use this Demo Application one F75111 two F75111 Attention Please: You must be install vcredist_x86.exe when fi rst time you run the F75111_DIO.exe DEMO AP,The vcredist_x86.exe include all required DLL fi le. WARNING: win7 system architecture, use the system administrator to open DIO utility 1.
  • Page 47 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot F75111 Layout Picture Introduction Initial Internal F75111 port address (0x9c)
  • Page 48 Enable/Disable WDT Enable : F75111_SetWDTEnable (BYTE byteTimer) Disable: F75111_SetWDTDisable () PULSE mode Sample to setting GP33, 32, 31, 30 output 1mS low pulse signal. this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_CONTROL, 0x00); //This is setting low pulse output this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_WIDTH_CONTROL, 0x01); //This selects the pulse width to 1mS this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_CONTROL_MODE, 0x0F);...
  • Page 49 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 50 //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_INPUT_DATA 0x12 // GPIO1X Input #defi ne GPIO3X_INPUT_DATA 0x42 // GPIO3X Input //-------------------------------------------------------------------------------------------------------- #defi ne GPIO2X_OUTPUT_DATA 0x21 // GPIO2X Output //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_PULSE_CONTROL 0x13 // GPIO1x Level/Pulse Control Register // 0:Level Mode // 1:Pulse Mode #defi ne GPIO1X_PULSE_WIDTH_CONTROL 0x14 // GPIO1x Pulse Width Control Register #defi...

  • Page 51: Io Device: F75111 Vb6 Under Windows

    3-16-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source fi le: 75111_VB_v1.2.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary fi le: 75111_VB_Src1.2.rar USERNAME & PASSWORD: sf How to use this Demo Application ● A Function - Choose your motherboard model ●...
  • Page 52 F75111 Layout Picture SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function...
  • Page 53 Function SetDOValue Function SetDOValue(dovalue As Integer) Dim Data As Integer Dim Value As Integer Data = 0 Value = dovalue If (Value And &H1) <> 0 Then Data = Data + &H1 End If If (Value And &H2) <> 0 Then Data = Data + &H2 End If If (Value And &H4) <>...
  • Page 54 Function CheckDIValue Function CheckDIValue() Dim GPIO1X As Integer Dim GPIO3X As Integer Dim DI1Xhex As String Dim DI3Xhex As String Dim Data As Long Data = 0 Call ReadI2CByte(&H12, GPIO1X) Call ReadI2CByte(&H42, GPIO3X) GPIO1X = GPIO1X And &HF0 GPIO3X = GPIO3X And &HF If (GPIO1X And &H10) <>...

  • Page 55: Io Device: F75111 Under Linux

    3-16-4 IO Device: F75111 under linux The Sample code source you can download from Source fi le: F75111v2.4L_SRC.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary fi le: F75111v2.4L_BIN.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-config --libs gtk+-2.0 gthread-2.0' in "Project->Build Option- >Linker Setting->Other linker option")
  • Page 56 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 57 Introduction IO function In fi le SMBus.c void SMBusIoWrite(BYTE byteOffset,BYTE byteData) outb( byteData , m_SMBusMapIoAddr + byteOffset); BYTE SMBusIoRead(BYTE byteOffset) DWORD dwAddrVal; dwAddrVal = inb(m_SMBusMapIoAddr + byteOffset); return (BYTE)(dwAddrVal & 0x0FF); Initial internal F75111 void F75111::InitInternalF75111() this->Write_Byte(F75111_INTERNAL_ADDR,GPIO1X_CONTROL_MODE ,0x00); //set GPIO1X to Input function this->Write_Byte(F75111_INTERNAL_ADDR,GPIO3X_CONTROL_MODE ,0x00);...
  • Page 58 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 59 //-------------------------------------------------------------------------------------------------------- #defi ne F75111_INTERNAL_ADDR 0x9C OnBoard F75111 Chipset #defi ne F75111_EXTERNAL_ADDR 0x6E External F75111 Chipset //-------------------------------------------------------------------------------------------------------- #defi ne F75111_CONFIGURATION 0x03 Confi gure GPIO13 to WDT2 Function //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_CONTROL_MODE 0x10 Select Output Mode or Input Mode #defi ne GPIO2X_CONTROL_MODE 0x20 Select GPIO2X Output Mode or Input Mode #defi...

  • Page 60: Cu21/Cu8/Cu9/Cu10: Usb 2.0 Port 4Pin (1.25Mm) Wafer

    3-17 CU21/CU8/CU9/CU10: USB 2.0 port 4pin (1.25mm) wafer PIN NO. DESCRIPTION DATA- DATA+ CU9CU10 pin1 pin1 CU21 3-18 CA1: Line-out/Line-in/Mic-in 2x5 pin (2.00mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION Line-out-R MIC-IN Line-in-R Line-in-L Line-out-L MIC-IN pin1...

  • Page 61: Calr1: Amplifier Line-Out Right/Left Channel 1X4 Pin (1.25Mm) Wafer

    3-19 CALR1: Amplifi er Line-out Right/Left channel 1x4pin (1.25mm) wafer PIN NO DESCRIPTION Left + Left - Right - Right + CALR1 pin1 3-20 CKM1: PS2 KB/MS 1x6 pin (1.25mm) wafer PIN NO. DESCRIPTION Keyboard Data Keyboard Clock CKM1 Mouse DATA Mouse Clock pin1 56 56...

  • Page 62: Cfp1: Front Panel Connector 2X5 Pin (2.0Mm) Wafer

    3-21 CFP1: Front Panel connector 2x5pin (2.00mm) wafer PIN NO DESCRIPTION PIN NO DESCRIPTION Power button pin Power button GND Reset pin Reset GND Power LED- Power LED + HDD LED- HDD LED+ LAN LED- LAN LED+ CFP1 pin1...

  • Page 63: Cc1/Cc2/Cc3/Cc4/Cc5/Cc6: Com 2X5Pin (2.00Mm) Wafer

    3-22 CC1/CC2/CC3/CC4/CC5/CC6: COM 2x5pin (2.00mm) wafer (RS232 Mode) PIN NO DESCRIPTION PIN NO DESCRIPTION (RS485 Mode) PIN NO DESCRIPTION PIN NO DESCRIPTION Data - Data + (RS422 Mode) PIN NO DESCRIPTION PIN NO DESCRIPTION TX - TX + RX + RX - Note: 1.

  • Page 64: Cpo1: Dc +5V/+12V Output 1X4 Pin (2.0Mm) Black Wafer Connector

    3-23 CPO1: DC +5/+12V output 1x4 pin(2.00mm) Black wafer connector PIN NO. DESCRIPTION +12V * Note: Attention! Check Device Power in spec CPO1 pin1 3-24 CO1: I C 4pin (1.25mm) wafer connector PIN NO. DESCRIPTION +3.3V C Clock C DATA pin1...

  • Page 65: Module Socket

    3-25 Module socket MPCE1/MPCE2: Mini card port 1/2 sockets 52pin PIN NO. Description PIN NO. Description +3.3V +1.5V SIM Power SIM Data PCIe-CLK- SIM CLK PCIe-CLK+ SIM Reset SIM RFU Reset PCIe-RX-/mSATA-RX+ +3.3V pin52 pin52 PCIe-RX+/mSATA-RX- +1.5V pin1 pin1 SMB-CLK MPCE1 MPCE2 PCIe-TX-/mSATA-TX-...

  • Page 66: Sim1: Sim Port1 Card Socket

    3-26 SIM1: SIM port 1 card socket PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA Note: 1. MPCE2 Pin 8,10,12,14,16 for SIM1 card reader use. SIM1...

  • Page 67: Sata1/Sata2: Sata Port Connectors 7Pin

    3-27 SATA1/SATA2: SATA port connectors 7pin PIN NO. DESCRIPTION Note: 1. CPO1 provides SATA HDD power +12V, GND, +5V SATA1 SATA2...

  • Page 68: Cbt1: Coms Battery 1X2 Pin (1.25Mm) Wafer (Oem)

    3-28 CBT1: COMS battery 1x2 pin (1.25mm) wafer (OEM) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Note: 1. When the board without Adaptor plug in, this board power RTC consumption about 2.7uA 2. If adaptor always plug in RTC power consumption about 0.1uA CBT1(OEM) pin1...

  • Page 69: Connector Wafer Of Compatible Brand And Part Number List

    3-29 Connector wafer of Compatible Brand and part number list Location CKTS PITCH Brand Name Mating connector Cable housing 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS CALR1 1x4 4Pin 1.25mm MOLEX 53047-0410 51021-0400 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS 2x5 10Pin 2.00mm...

  • Page 70: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS fi rst operates an auto-diagnostic test called POST (Power on Self Test) for all necessary hardware, it detects the entire hardware devices and confi...

  • Page 71: Bios Menu Screen & Function Keys

    4-2 BIOS Menu Screen & Function Keys In the above BIOS Setup main menu of, you can see several options. We will explain these options step by step in the following pages of this chapter, but let us fi rst see a short description of the function keys you may use here: ●...

  • Page 72: Getting Help

    4-3 General Help Status Page Setup Menu/Option Page Setup Menu Press F1 to pop up a help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window, press <Esc>.

  • Page 73: Menu Bars

    4-4 Menu Bars There are six menu bars on top of BIOS screen: Main To change system basic confi guration Advanced To change system advanced confi guration Security Password settings Power PME & Power button settings Boot Exit Save setting, loading and exit options. User can press the right or left arrow key on the keyboard to switch from menu bar.

  • Page 74: Advanced

    4-6 Advanced Boot Confi guration Please refer section 4-6-1 Graphics Confi guration Please refer section 4-6-2 PCH-IO Confi guration Please refer section 4-6-3 PCH-FW Confi guration Please refer section 4-6-4 SIO FINTEK81966 Please refer section 4-6-5 Console Redirection Please refer section 4-6-6...

  • Page 75: Boot Configuration

    4-6-1 Boot Confi guration Numlock Select Power-on state for Numlock, default is <Off>...

  • Page 76: Graphics Configuration

    4-6-2 Graphics Confi guration GTT Size Graphics Translation Table Size. The optional settings are: 2MB, 4MB, 8MB(default) Aperture Size The optional settings are: 128MB, 256MB, 512MB, 1024MB(default), 2048MB DVMT Pre-Allocated Use this item to select DVMT 5.0 pre-allocated (fi xed) graphics memory size used by the internal graphics device.

  • Page 77: Display Configuration

    4-6-2-1 ► Display Confi guration Boot Display To select the displays priority to LVDS, VGA or HDMI...

  • Page 78: Pch-Io Configuration

    4-6-3 PCH-IO Confi guration PCI Express Confi guration Please refer section 4-6-3-1 SATA And RST Confi guration Please refer section 4-6-3-2 HD Audio Confi guration Please refer section 4-6-3-3 PCH LAN Controller To enable/disable onboard NICs.

  • Page 79: Pci Express Configuration

    4-6-3-1 ► PCI Express Confi guration PCI Express Root Port 01 for MPCE1 Please refer section 4-6-3-1-1 PCI Express Root Port 01 for MPCE2 Please refer section 4-6-3-1-2 PCI Express Root Port 03 for Lan 1 Please refer section 4-6-3-1-3 PCI Express Root Port 04 for Lan 2 Please refer section 4-6-3-1-4...

  • Page 80: Pci Express Root Port 01 For Mpce1

    4-6-3-1-1 ► PCI Express Root Port 01 for MPCE1 PCI Express Root Port 01 for MPCE1 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 81: Pci Express Root Port 02 For Mpce2

    4-6-3-1-2 ► PCI Express Root Port 02 for MPCE2 PCI Express Root Port 02 for MPCE2 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 82: Pci Express Root Port 03 For Lan 1

    4-6-3-1-3 ► PCI Express Root Port 03 for Lan 1 PCI Express Root Port 03 for Lan 1 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 83: Pci Express Root Port 04 For Lan 2

    4-6-3-1-4 ► PCI Express Root Port 04 for Lan 2 PCI Express Root Port 04 for Lan 2 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 84: Sata And Rst Configuration

    4-6-3-2 ► SATA And RST Confi guration SATA Controller Use this item to Enable or Disable SATA Device. The optional settings are: Enabled(default) or Disabled SATA Mode Selection Support AHCI Mode only.

  • Page 85: Hd Audio Configuration

    4-6-3-3 ► HD Audio Confi guration HD-Audio Supported. The optional settings are: Enabled(default) or Disabled...

  • Page 86: Pch-Fw Configuration

    4-6-4 PCH-FW Confi guration ME State The optional settings are: Enabled(default) or Disabled Manageability Features State The optional settings are: Enabled or Disabled(default)

  • Page 87: Sio Fintek81966

    4-6-5 SIO FINTEK81966 Serial Port 1/2/3/4/5/6 Use this item to enable or disable serial port. The optional settings are: Enabled(default), Disabled. Serial Port A Base IO Address / Interrupt / Serial Mode Use this item to select an optimal setting for super IO device. The optional settings are: IO=3F8h;...

  • Page 88: Hardware Monitor

    Serial Port C Base IO Address / Interrupt Use this item to select an optimal setting for super IO device. The optional settings are: IO=3E8h; IRQ=10 (default) IO=2F8h; IRQ=3,4,5,6,7,9,10,11 IO=2E8h; IRQ=3,4,5,6,7,9,10,11 IO=3F8h; IRQ=3,4,5,6,7,9,10,11 IO=4F8h; IRQ=3,4,5,6,7,9,10,11 IO=4E8h; IRQ=3,4,5,6,7,9,10,11 Serial Port D Base IO Address / Interrupt Use this item to select an optimal setting for super IO device.
  • Page 89 4-6-5-1 ► Hardware Monitor Press [Enter] to view PC health status. This section shows the status of your CPU, Fan, and overall system. This is only available when there is Hardware Monitor function onboard.

  • Page 90: Console Redirection

    4-6-6 Console Redirection Console Serial Redirect Use this item to enable or disable Console Redirection. The optional settings are: Enabled, Disabled(default).

  • Page 91: Security

    4-7 Security Supervisor Password To set up an Supervisor password 1. Select Supervisor Password. The screen then pops up an Create New Password dialog. 2. Enter your desired password that is no less than 3 characters and no more than 10 characters.

  • Page 92: Power

    4-8 Power ACPI S3 Select ACPI sleep state (S3) supported The optional settings: Enabled, Disabled(default) Wake On USB Wake on USB from Mouse or Keyboard interrupt signal when system in S3 state The optional settings: S3(default), Disabled Wake On LAN Wake on LAN from LAN1 when system in S3 S5, or both of them state The optional settings: S3(default), S5, S3/S5, Disabled Wake On RTC...

  • Page 93: Boot

    4-9 Boot Boot type Select boot type for Dual type ,Legacy boot type or UEFI boot type, default is UEFI boot type Quiet Boot The optional settings are: Enabled(default), Disabled. Network Stack Enabled for PXE function, default is disabled. Determine which EFI storage device for booting, this item will not show on this page if there is no any storage device found.

  • Page 94: Exit

    4-10 EXIT Exit Saving Changes This item allows user to reset the system after saving the changes. Save Change Without Exit This item allows user to saving the changes but doesn’t restart. Exit Discard Changes This item allows user restart the system but no saving the changes Load Optimal Default Use this item to restore the optimal default for all the setup options.

  • Page 95: Chapter 5 Driver Installation

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 96 AUTOMATIC DRIVER INSTALLATION menu 1. INF Install Intel Skylake or Kaby Lake chipset driver 2. VGA nstall onboard VGA driver 3. HD Audio Install HD Audio Codec driver 4. ME Tool Install Intel Management Engine driver 5. LAN To the LAN driver Readme fi le 6.

  • Page 97: Inf Install Intel Skylake Kaby Lake Chipset Driver

    5-1 INF Install Intel Skylake Kaby Lake Chipset Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu"screen, click "INF". screen, click "Next". 3. At the "License Agreement" screen, click 4. At the "Readme File Information" screen, click "Accept"...

  • Page 98: Vga Install Intel Skylake & Kaby Lake Vga Driver

    5-2 VGA Install Intel Skylake & Kaby Lake VGA Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER 2. At the "Welcome to the Setup INSTALLATION menu" screen, click "VGA". Programscreen, Click "Next". 4. At the "Readme File Information” screen, 3.

  • Page 99: Hd Audio Install High Definition Audio Driver

    5-3 HD Audio Install High Defi nition Audio Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Next". menu" screen, click "HD Audio". 4. Click "Finish" then to restart the computer. 3. Click "Next" NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 64-bit, X:\driver\sky_lake\Audio\0006-64bit_Win7_Win8_Win81_Win10_R279 For Windows 32-bit...

  • Page 100: Me Tool Install Intel Usb 3.0 Me Driver

    5-4 ME Tool Install Intel USB 3.0 ME Driver (example for WIN10 64bit) 2. At the "Welcome to the Setup Program 1. At the "AUTOMATIC DRIVER INSTALLATION menu" screen, click "ME Tool". screen, Click "Next" 4. At the "Destination Folder" screen, Click 3.

  • Page 101: Lan Install Lan Driver (Example For Win10 64Bit)

    5-5 LAN Install LAN Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER 2. At the "Intel Network Connections" INSTALLATION menu" screen, click "LAN". screen, Click "Install Drivers and Software". 3. Click "Next" 4. At the "License Agreement" screen, Click "□"...
  • Page 102 6. Click "Finish" to fi nish the setup. 7. Click "Install" 3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path X:\driver\sky_lake\LAN\Autorun.exe 5-6 Items for Windows 7 installation Note : Before Windows 7 installation, USB 3.0 Driver MUST rebuild in a new DVD or in a pen- drive.

  • Page 103: Kmdf Install Windows Update Package (For Win 7 Only)

    5-6-1 KMDF Install Windows Update package (FOR Win 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Yes" menu", click "KMDF" 3. Click "Restart Now" to restart the computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64-bit, X:\driver\sky_lake\ME\KMDF_Win7\kmdf-1.11-Win-6.1-x64 For Windows 7 32-bit, X:\driver\sky_lake\ME\KMDF_Win7\kmdf-1.11-Win-6.1-x86...

  • Page 104: Me Tool Install Intel Me Tool Driver For Win7 Please Install Kmdf

    5-6-2 ME Tool Install Intel ME Tool driver for WIN7 Please install KMDF fi le fi rst. 2. Click "Yes". KMDF fi le must being installed 1. At the "AUTOMATIC DRIVER INSTALLATION before ME Tool installation. menu", click "ME Tool" 4.

  • Page 105: Usb3.0 Install For Win7

    5-6-3 USB 3.0 Install for WIN7 2. Click "Next". 1. At the "AUTOMATIC DRIVER INSTALLATION menu", click "USB 3.0". 4.Click "Next ". 3. Click "Yes". 5. Click "Next". 6. Click "Finish" to fi nish the setup. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, X:\driver\sky_lake\USB 3.0\Setup.exe...

  • Page 106: Tpm 2.0

    5-6-4 TPM 2.0 For Windows 7 Ultimate and i7 CPU only...

  • Page 107: How To Update Insyde Bios

    (Storage device could be USB FDD or USB pen drive.) STEP 2. Copy utility program to your bootable disc. You may download it from our website. STEP 3. Copy the latest BIOS for your LEX motherboard from our website to your bootable disc.

  • Page 108: Appendix B: Resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

This manual is also suitable for:

3i610hw

Table of Contents