Table of Contents
Advertisement
3 Select a code number from 1 to 15 or one
of the following options:
option
Receive All
Sets your phone to receive LINCaround
transmissions from any phone that is set to
the same channel, regardless of the code
(1-15). When you receive transmissions
with the code set to Receive All, the display
changes from Receive All to the code on
which the transmission was received.
Tip: You can reply to an incoming call within
6 seconds after hearing the short ending
beep by pressing the PTT button.
Note: You cannot initiate a code call when
the code is set to Receive All. If you push the
PTT button with the code set to Receive All,
you will receive an error message.
option
Pvt Only
Allows you to have a private conversation
with another person using LINCaround.
When on a private LINCaround call, no
other parties can hear your conversation. In
order to make a private LINCaround call,
you must use the valid 10-digit Personal
Telephone Number (PTN) of the person you
are calling. The person you are calling must
be in LINCaround and set to the same
channel to receive your call.
Note: An error message will occur if you
don't use a valid PTN, or the person that
you are trying to reach is not in LINCaround,
or is set to a different channel or out of
range.
4 When you are finished, press a under
Back to return to the LINCaround idle
screen.
53
calls
Advertisement
Table of Contents
