Download Print this page
Striem Lab Basin LB Series Installation, Operation, Maintenance Manual

Striem Lab Basin LB Series Installation, Operation, Maintenance Manual

Neutralization tank

Advertisement

Quick Links

NEUTRALIZATION TANK
Installation, Operation, & Maintenance Guide
913-222-1500
HELP@STRIEMCO.COM
CUSTOMER SERVICE HOURS: 8 AM - 5 PM CST
6/7/24
LB-500
STRIEMCO.COM
NEUTRALIZATION TANK
Installation, Operation, & Maintenance Guide
OVERVIEW
Striem LB model LB-500 is a 500 gallon polyethylene neutralization tank intended for below-grade installation.
It is designed to bring wastewater to an acceptable state for local wastewater treatment facilities through
neutralization or dilution.
OPERATION
Low pH wastewater enters through the inlet connection. As the wastewater moves through the unit, its pH is
raised through dilution with neutral water, or neutralization through limestone media.
LIFETIME WARRANTY
Our products are designed to last the lifetime of the plumbing system in which they are installed. If they don't,
we will repair or replace them at no charge. Product damage due to normal wear and tear may be repaired or
replaced at a reasonable charge. See website for full details.
500 GALLON
NEUTRALIZATION TANK
LIFETIME
LIFETIME
GUARANTEED
GUARANTEED
LB-500
LB-500
LB SERIES

Advertisement

loading
Need help?

Need help?

Do you have a question about the Lab Basin LB Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Striem Lab Basin LB Series

  • Page 1 Installation, Operation, & Maintenance Guide OVERVIEW Striem LB model LB-500 is a 500 gallon polyethylene neutralization tank intended for below-grade installation. It is designed to bring wastewater to an acceptable state for local wastewater treatment facilities through neutralization or dilution.
  • Page 2 Debris and sludge must be cleaned out periodically to allow the free flow of wastewater through the unit. If it DOING SO MAY RESULT IN PROPERTY DAMAGE, is determined that the system will encounter large amounts of solids, then specify a Striem Solids Interceptor. SERIOUS BODILY INJURY, OR DEATH! Refer to Installation Instructions for correct testing procedure.
  • Page 3 UNIT INSTALLATION (by others) Lower and center the unit into hole using Striem lifting lug kit (included). Do not use chains or accessways to move the unit. The water table must not exceed the tank height prior to the addition of risers.

This manual is also suitable for:

Lab basin lb-500