1. Manuals
  2. Brands
  3. TrolMaster Manuals
  4. Irrigation System
  5. Aqua-X
  6. User manual

TrolMaster Aqua-X User Manual

Irrigation controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Aqua-X Controller (NFS-1)
User Manual
OVERVIEW
Aqua-Xlrrigation Controller is a pioneering and innovative hydroponic irrigation control system.This
smartphone App based system can control up to 30 outputs (24V or 110V) and monitor the pH, EC and
water temperature of nutrient. Water detectors for watering confirmation allow the system to send alerts to
user when the watering schedule failed. With its incredible flexibility, everyone could easily automate their
irrigation systems.
The system could control pumps by 110V Control Board and solenoid valves by 24V Control Board. When
the massive control outputs, user could easily manage the delivery schedules for multiple nutrients, multiple
rooms and multiple zones
A sensor board with EC/pH/Temp sensors is also available to allow user to monitor and log all the historical
data of their nutrients. When the measured value exceeds your custom setting range, a warning message
will be sent to your smartphone through the TM+ app.
TrolMaster's free smartphone app allows user to monitor and control their watering schedules at their
fingertips. Graphic interface makes multiple schedules easy to adjust and monitor. The innovative watering
confirmation feature prevents enormous loss caused by watering failures.
01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aqua-X and is the answer not in the manual?

Questions and answers

William G Fox
April 1, 2025

my trolmaster shows on screen no 24v board online. System was working fine until I press reset divice button

0
1 comments:
Mr. Anderson
April 1, 2025

When the TrolMaster Aqua-X displays "no 24V board online" after pressing the reset device button, it means the 24V control board is either not connected to the power supply or the RJ12 cable is not properly connected to the corresponding 24V control port on the controller.

This answer is automatically generated

0

Related Manuals for TrolMaster Aqua-X

Summary of Contents for TrolMaster Aqua-X

  • Page 1 When the measured value exceeds your custom setting range, a warning message will be sent to your smartphone through the TM+ app. TrolMaster's free smartphone app allows user to monitor and control their watering schedules at their fingertips. Graphic interface makes multiple schedules easy to adjust and monitor. The innovative watering...
  • Page 2 FACTS Here are some important things to consider when using the Aqua-X lrrigation Controller. Each set of Aqua-X lrrigation Controller can connect up to 30 outputs (24Vor 110V) and monitor the pH ● value, EC value and water temperature of nutrient.

  • Page 3: Installation

    INSTALLATION Determine where to locate the main controller. The controller comes with a simple to use DlN type bracket. Pull the 4 tabs outward to release the bracket from the unit, mount the bracket to a wall or surface, place the unit back on the bracket and press the 4 tabs back in to lock the unit in place.
  • Page 4 2. Control Boards (24V or 110V) Connection: Connect the 24V Control Board to the Aqua-X with a RJ12 cable going from the 24V CONTROL socket to the first 24V Control Board to be connected. Plug the 24V Control Board to the wall outlet for power supply.

  • Page 5: Start Settings

    BUTTONS The NFS-1 Aqua-XController is extremely easy to use. The backlit 128x128 LCD display will provide the user with current conditions and access to all settings. All settings can be accessed by using the 6 push buttons on the front of the unit. The button functions are described below. DOWN LEFT RIGHT...
  • Page 6 If it is the first time you use the NFS-1 Controller, when you power on the NFS-1 Controller, the Welcome screen / page will display and remind user to press “ENTER” to set system time. First-Use Welcome Page Normal Start Page NOTE: Press the ENTER button to set system time before use.
  • Page 7 Indication: Alarm Activated Internet Connected NOTE: Download the TrolMaster App from App Store or Google Play. Alarm Message Page Water Detector Page Main Menu Page On the Main Menu page, press LEFT button to get access to Water Detector page. lt shows output(s) that has (have) been associated with the connected Water Detector.

  • Page 8: Setting Page

    Main Menu Page Alarm Message Page Water Detector Page On the Main Menu page, press RlGHT button to get access to Alarm Message page. The LCD screen will show record of all alarm messages. Press RlGHT button again, the LCD screen will show the Water Detector page.
  • Page 9 On the Main Menu page or Alarm Message page, press ENTER button to get access to the SETTlNG page. The LCD screen will display 4 subjects (110V Board, 24V Board , Alarm Setting and System Setting) as shown on above picture. You can press the respective button (UP/DOWN/LEFT/RIGHT) to select the subject that you want to adjust the setting.
  • Page 10 SETTING Page 110V Control Board A 110V Control Board B 110V B Setting Page On the SETTING page of selected output such as 110V A1, press ENTER button and the tick icon on the “By schedule" will be highlighted and blinking. You can also press DOWN button to select “By recycle” . Press ENTER button to confirm and save the setting.
  • Page 11 b. By recycle: Once the “By recycle" setting is selected, user can press “UP" or “DOWN" button to select “Start". “On time" & “Times" for change. Press ENTER button to activate the setting. For example, when “Start” is selected, press ENTER button and the HOUR will be highlighted and blinking, user can press UP or DOWN button to change the hour.

  • Page 12: Board Setting

    24V BOARD SETTING The setting of 24V Board Setting is similar to the 110V Board Setting. WATER DETECTOR SETTING Aqua-X Controller Water Detector...
  • Page 13 The default function of Water Detector (WD-1) is to do leak detection and the symbol is a triangle shown in the Aqua-X Controller. When WD-1 detects water leakage, it will send alarm message to your Smartphone one minute later. You can also check the alarm message in the Aqua-X Controller.
  • Page 14 If the output is successfully assigned with the Water Detector and the Water Detector is connected with the Aqua-X Controller, there will be a dot displayed before the name of the assigned output on the Control Board interface as illustrated below.

  • Page 15: Alarm Setting

    ALARM SETTING On the Setting page, press DOWN button to select the Alarm Setting, Press ENTER button and the LCD screen will display four Settings for selection EC Alarm, Temp Alarm, pH Alarm and Moist Alarm. User can press UP button or DOWN button to select anyone of them for setting. a.
  • Page 16 User can also press the DOWN button to select the MAX value directly to edit the setting if the user would like to keep the MlN value unchanged. The steps to set the MAX value are similar. c. pH Alarm: When the pH Alarm is selected, press the ENTER button to enter the pH Alarm setting page.

  • Page 17: System Setting

    d. Moist Alarm: When the Moist Alarm is selected, press the Enter button to enter the Moist Alarm setting page. The LCD screen will display the MIN value and MAX value. Press ENTER button to activate the setting page and the MIN value will be highlighted and blinking.
  • Page 18 a. Temp Format: When the Temp Format is selected, press the ENTER button and the temperature symbol F or C will be highlighted and blinking. Press UP or DOWN button to convert the temperature format between F and C. Finally, press ENTER button to confirm and save the change. The LCD screen will display “Setting saved” . b.
  • Page 19 c. Serial Number: When the Serial Number column is selected, press ENTER button and the LCD display will show the QR code and serial number. d. System Reset: When the System Reset column is selected, press ENTER button and the LCD display will show Device Reset, Factory Reset, Firmware Updateand lot FW Update.
  • Page 20 NOTE: For the Firmware Update and lot FW Update, make sure to insert the MicroSD card with the latest version of upgrade software.
  • Page 21 e. Calibration: When the Calibration column is selected, press ENTER button and the LCD display will show Calibrate EC, Calibrate pH7.0, Calibrate pH4.0. Press UP button or DOWN button to select any of them for calibration. NOTES: Please note there are two results for the calibration. One is successful, the other is unsuccessful (failure). Please calibrate pH7.0 first.

  • Page 22: General Information

    Components that are excluded from warranty are components that have failed due to abnormal usage. In the case of defects of the Aqua-X lrrigation Controller (NFS-1), the Controller will either be replaced or repaired using new or reconditioned products or parts. lf the Controller will be replaced this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e.

  • Page 23: Troubleshooting

    Please use TrolMaster's components for better performance. In the case of defects of the Aqua-X Controller, the Aqua-X Controller will either be replaced or repaired using new or reconditioned products or parts by TrolMaster within three-year warranty from the original date of purchase.
  • Page 24 RESOLUTION The Aqua-Xlrrigation Controller (NFS-1) is Check the low-volt power supplyis plugged connected to power, but it does not seem to incorrectly to the Aqua-X lrrigation Controller be working / no display. (NFS-1). Horizontal line indicates the corresponding The Temperature, pH, EC values on the main sensor error, flashing indicates the corresponding screen display horizontal line or flashing.
  • Page 25 3. Pour la sécurité, il est nécessaire de connecter le fil de terre. Si un court-circuit se produisait, le courant circulerait à travers le fil de t erre, causant un fusible grillé ou un disjoncteur déclenché. 4. La Aqua-X Controller de l'appareil doit être placée dans un endroit où il facile de la retirer en cas de panne.

  • Page 26: Specifications

    SPECIFICATIONS 100-240VAC, 50/60Hz Input Voltage 100-240VAC, 50/60Hz Tension d'entrée Certifications ETL/FCC Certifications ETL/FCC Degree of Ingress Protection IP20 Indice de protection IP20 OA6-24 24V Control Board: Max. 5pcs per set OA6-110 110V Control Board: Max. 5pcs per set DSP-1 Program Device Station: Max.
  • Page 27 REGISTRATION TrolMaster Agro Instruments Co., Ltd. will occasionally release updated frmware for the Aqua-X Irrigation Controller (NFS-1). By registering your NFS-1 lrrigation controller on our website www.trolmaster.com, we can notify you when an update is available. We will not sell, rent or share your personal information.

This manual is also suitable for:

Nfs-1

Table of Contents

Save PDF