Summary of Contents for febromed Oceanis
- Page 1 Oceanis® Relaxation and Birthing Pool Assembly Instructions F-072 GB Rev00 14.03.2024...
-
Page 2: Legal Information
Assembly instructions: Oceanis® relaxation and birthing pool Item number: OC-33000 Imprint Manufacturer: febromed GmbH & Co. KG Am Landhagen 52 59302 Oelde, Germany Contact: Phone: +49 2522 9201900 Fax: +49 2522 9201919 Internet: www.febromed.de E-mail: info@febromed.de Registration court: Münster District Court HRB no.: 10077... -
Page 3: Table Of Contents
Table of Contents ......................3 About the Assembly Instructions ................4 3.1 Purpose of Assembly Instructions ..................4 3.2 Assembling the Oceanis® ....................4 3.3 Using the Assembly Instructions ..................4 Setting up the Oceanis® ..................... 5 Sanitary installations ....................5 5.1 Connection water pipes ....................... -
Page 4: About The Assembly Instructions
Oceanis® as well as the a higher potential must be taken into account. equipment and to protect the health and life of febromed assumes no liability for the classifi- personnel and patients. -
Page 5: Setting Up The Oceanis
The Oceanis® is delivered pre-assembled on a pallet in a carton. Additional components can Fig.1: Packaged Oceanis® be found well-padded in the box. Two people are required to set up the Oceanis® birthing pool. ATTENTION Property Damage Due to Sharp Objects Sharp objects can damage the surface of the pool. -
Page 6: Connection Water Pipes
Figure 3 Water connection pool side. Figure 1 Sealing the connection pipes. Screw the supplied screw connections into the on-site water connections. (fig. 3 – item 1). Use drinking water – certified sealing material for this. F-072 GB Rev00 14.03.2024 Oceanis® Assembly Instructions... -
Page 7: Sewage Connection
Check all pipes and connections for leaks. components of the pool. Recreate all leaking connections and seal them. Assemble components 7.1 Shower head holder Screw the two shower head holders into the designated position. Oceanis® Assembly Instructions F-072 GB Rev00 14.03.2024... -
Page 8: Shower Hose
Insert the sealing ring into the shower hose. If you have ordered the option of the double Turn the shower hose to the angled inlet spout, the inlet tap of the Oceanis® can be re- elbow. moved after each filling of the pool in order to... -
Page 9: Adjusting The Water Temperature
If the pool has already been delivered glued, please follow steps 3 - 6. Figure 10 Disassemble the double spout inlet tab. If the pool is not glued, please follow all steps in this chapter. Oceanis® Assembly Instructions F-072 GB Rev00 14.03.2024... - Page 10 ▪ This makes it easier to detect possible leaks in the connection pipes or similar. Figure 12 Set silicone joint. Figure 13 Smooth the silicone joint with a joint smoother. F-072 GB Rev00 14.03.2024 Oceanis® Assembly Instructions...
-
Page 11: List Of Figures
Figure 10 Disassemble the double spout inlet tab..............9 Figure 11 Adjusting the water temperature. . 9 Figure 12 Set silicone joint......10 Figure 13 Smooth the silicone joint with a joint smoother..........10 Oceanis® Assembly Instructions F-072 GB Rev00 14.03.2024... -
Page 12: Appendices
Shut-off valve (on site) Article no.: ZK0000_694 Stainless steel corrugated hose Inclined filter (optional) Article no.: ZK0000_578 System separator BA Mixer tab Article no.: ZK0000_489 Article no.: ZK0000_361 Shower head solenoid valve Article no.: ZK0000_454 F-072 GB Rev00 14.03.2024 Oceanis® Assembly Instructions... -
Page 26: Notes
12 Notes F-072 GB Rev00 14.03.2024 Oceanis® Assembly Instructions... - Page 27 Oceanis® Assembly Instructions F-072 GB Rev00 14.03.2024...
- Page 28 GmbH & Co. KG Am Landhagen 52 D-59302 Oelde Phone: +49 0 2522 9201900 Fax: +49 0 2522 9201919 Internet: www.febromed.de E-mail: info@febromed.de...
Need help?
Do you have a question about the Oceanis and is the answer not in the manual?
Questions and answers