FLIR Teledyne DRAGONFLY S Installation Manual
  1. Manuals
  2. Brands
  3. FLIR Manuals
  4. Machine Vision Systems
  5. Teledyne DRAGONFLY S
  6. Installation manual
FLIR Teledyne DRAGONFLY S Installation Manual

FLIR Teledyne DRAGONFLY S Installation Manual

Industrial machine vision cameras
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION  GUIDE
8/1/2024
©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
DRAGONFLY® S
INDUSTRIAL MACHINE VISION CAMERAS
Version 1.0
Revised
8/1/2024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Teledyne DRAGONFLY S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FLIR Teledyne DRAGONFLY S

Summary of Contents for FLIR Teledyne DRAGONFLY S

  • Page 1 INSTALLATION  GUIDE DRAGONFLY® S INDUSTRIAL MACHINE VISION CAMERAS Version 1.0 Revised 8/1/2024 8/1/2024 ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 2 For more detailed information about recycling of this product, please contact us. Trademarks Names and marks appearing on the products herein are either registered trademarks or trademarks of Teledyne FLIR, LLC and/or its subsidiaries. Licensing To view the licenses of open source packages used in this product please see...

  • Page 3: Table Of Contents

    6.3.5 Dragonfly S Camera Board-level Back Connector Drawing 6.3.6 Dragonfly S Camera Board-level Side Connector Drawing 6.3.7 Keepout Layer—Board-level Models 6.4 Interface Connector 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 4 7.2 GPIO Electrical Characteristics 7.3 Input Timing Characteristics 7.4 Output Timing Characteristics 8 Troubleshooting 8.1 Support 8.2 Status Indicator LED Contacting Teledyne FLIR Revision History 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 5: Dragonfly S Camera Installation Guide

    These resources as well as knowledge base articles and application notes can be found on the Support page for the product. Dragonfly S USB3 Camera Support Articles 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 6: Handling Precautions And Camera Care

    2 Handling Precautions and Camera Care Handling Precautions and Camera Care Your Teledyne FLIR machine vision camera is a precisely manufactured device and should be handled with care. Here are some tips on how to care for the device. Avoid electrostatic charging.

  • Page 7: Dragonfly S Camera Installation

    For board-level models—Heatsink For board-level models—USB3 connector locking bracket (optional) Tripod adapter (optional) (see Mounting your Dragonfly S Camera) Teledyne FLIR sells a number of the additional parts required for installation. Visit the Teledyne FLIR Accessories page. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging...

  • Page 8: Installing Your Interface Card And Software

    After download is complete, open the file to start the Spinnaker setup wizard. e. Follow the steps in each setup dialog. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 9: Installing Your Board-Level Dragonfly S Camera

    Unscrew the dust cap from the lens holder to install a lens. 7. Plug in the GPIO connector if required GPIO can be used for trigger and strobe. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 10 The SpinView application can be used to test the camera's image acquisition capabilities. Changes to your camera's installation configuration can be made using the SpinView application. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 11: Installing Your Cased Dragonfly S Camera

    The SpinView application can be used to test the camera's image acquisition capabilities. Changes to your camera's installation configuration can be made using the SpinView application. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 12: Powering Your Dragonfly S Camera

    When the camera is power cycled (power disengaged then re-engaged), the camera reverts to its default factory settings, or if applicable, a saved user set. Related Knowledge Base Articles How can I power my USB3 camera? 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 13: Tools To Control Your Dragonfly S Camera

    Included with the SDK are a number of source code examples to help you get started. Spinnaker API examples are provided for C, C++, C#, and VB.NET languages. These examples are precompiled for your convenience. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 14: Using Genicam Applications

    Using USB3 Vision cameras with Matrox Imaging Library Using USB3 Vision cameras with MVTec's Halcon software Using USB3/USB2 cameras with Cognex VisionPro 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 15: Configuring The Dragonfly S Camera Setup

    2. From the Devices list, select the camera and click the Switch Driver button. 3. Select the driver from the drop-down list. 4. Click Install Driver. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 16: Dragonfly S Camera Firmware

    Firmware is programming that is inserted into the programmable read-only memory (programmable ROM) of most Teledyne FLIR cameras. Firmware is created and tested like software. When ready, it can be distributed like other software and installed in the programmable read-only memory by the user.
  • Page 17 5 Configuring the Dragonfly S Camera Setup Warning! Do not disconnect the camera during the firmware update process. Related Knowledge Base Articles Teledyne FLIR machine vision software and firmware version numbering systems Determining my camera's firmware version Should I upgrade my camera firmware or software? 8/1/2024 ®...

  • Page 18: Dragonfly S Camera Physical Interface

    M2 x 2.5 mounting holes Status LED Mounting Status Indicator LED Camera label Contains camera information such as model name, serial number and required compliance. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 19: Dragonfly S Board-Level Physical Description

    General purpose I/O connector (GPIO) General Purpose Input/Output (GPIO) Status LED Status Indicator LED Mounting holes For attaching lens mount and heatsink 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 20: Dragonfly S Camera Dimensions

    CS-mount Side S-mount Back S-mount Side Board-level Back and Side Connector Connector Connector Connector Connector 6.3.1 Dragonfly S Camera CS-mount Back Connector Drawing 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 21: Dragonfly S Camera Cs-Mount Side Connector Drawing

    6 Dragonfly S Camera Physical Interface 6.3.2 Dragonfly S Camera CS-mount Side Connector Drawing 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 22: Dragonfly S Camera S-Mount Back Connector Drawing

    6 Dragonfly S Camera Physical Interface 6.3.3 Dragonfly S Camera S-mount Back Connector Drawing 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 23: Dragonfly S Camera S-Mount Side Connector Drawing

    6 Dragonfly S Camera Physical Interface 6.3.4 Dragonfly S Camera S-mount Side Connector Drawing 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 24: Dragonfly S Camera Board-Level Back Connector Drawing

    Areas marked in red (front and back) are locations where components can change or move, potentially affecting hardware integration as board revisions occur. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 25 6 Dragonfly S Camera Physical Interface 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 26: Interface Connector

    USB 3.1 Micro B Connector For board-level or partial cased models, an optional locking bracket (ACC-01-0020) is available to provide side-locking of the USB3 cable. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 27: Interface Cables

    6 Dragonfly S Camera Physical Interface Interface Cables To purchase a recommended cable from Teledyne FLIR, visit the AccessoriesàCables page. The USB3 standard does not specify a maximum cable length. Note: A 5-meter USB3 cable (or longer) is not recommended for laptops or on board controllers.

  • Page 28: Mounting Your Dragonfly S Camera

    Warning! To avoid possible burns do not touch the camera while in operation. Wait at least 15 minutes after powering off before touching. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 29: Lens Mounting

    Make sure the camera has enough open space around it to facilitate the free flow of air. 6.10 Lens Mounting Lenses are not included with cameras. Teledyne FLIR sells a number of lenses compatible with our cameras from our Accessories àLenses page.

  • Page 30: Infrared Cut-Off Filters

    The properties of this filter are illustrated in the results below. IR filter transmittance graph 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 31 Removing the IR filter alters the optical path of the camera, and may result in problems obtaining proper focus with your lens. Related Knowledge Base Articles Removing the IR filter from a color camera 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 32: Sensor Shutter Type

    The readout time for each line is the same, but the start and end times are staggered. Readout time for a line is equal to 1/Horizontal Line Frequency. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 33 One advantage of a rolling shutter is increased sensitivity. However, because exposure starts at different times throughout the frame, there are known artifacts such as skew, wobble, and partial exposure. 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 34: Input/Output Control

    Measurement conditions: Non-Isolated Output: VCC=5 V, Rext=330 Ohm, Non-Isolated Input: VCC=3.3 V. Measured over operating temperature range (-20°C to +50°C ambient temperature), unless otherwise noted. 1—GPIO cable assembly wire colors 2—Dual function pin 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 35: Gpio Electrical Characteristics

    12 V 2.0 kΩ 6 mA 12 V 2.4 kΩ 5 mA 24 V 4.7 kΩ 5.2 mA Values are for reference only 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.
  • Page 36 7 Input/Output Control Non-isolated input and output circuit 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 37: Input Timing Characteristics

    Input Threshold High Voltage 4.54 V Input Threshold Low Voltage 1.26 V Cycle Rise Time 10.8 μs Cycle Fall Time 2 μs Current 4.1 mA 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 38: Output Timing Characteristics

    4.48 V Output Threshold Low Voltage 0.7 V Cycle Rise Time 2.6 μs Cycle Fall Time 0.23 μs Opto Current 4.8 mA 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

  • Page 39: Troubleshooting

    8 Troubleshooting Troubleshooting Support Teledyne FLIR endeavors to provide the highest level of technical support possible to you. Most support resources can be accessed through your product's Support page. Dragonfly S USB3 Camera Support Articles Contacting Technical Support Before contacting Technical Support, have you: 1.

  • Page 40: Contacting Teledyne Flir

    Find specifications, support articles, downloads on the website Teledyne FLIR Website machine vision Revision History Version Date Description August 1, 2024 Support for DR-U3-50Y2 8/1/2024 ® Teledyne FLIR Dragonfly S Camera Installation Guide ©2015-2024 FLIR Integrated Imaging Solutions Inc. All rights reserved.

This manual is also suitable for:

Dr-u3-50y2m-c1-s

Table of Contents