BenQ W1100 User Manual page 48

FUNCTION
High Altitude
Mode
Lamp
Settings
Security
Settings
Baud Rate
LED Indicator
Reset All
Settings
Current
System
Status
48 Operation
DESCRIPTION
A mode for operation in high altitude areas. See
altitude environment" on page 36
Lamp Mode
See "Setting Lamp Mode as Economic" on page 50
Reset lamp timer
See "Resetting the lamp timer" on page 54
Equivalent Lamp Hour
ee "Getting to know the lamp hour" on page 50
S
Change password
You will be asked to enter the current password before changing to a
new one.
Change Security Settings
Power on Lock
See "Securing the projector" on page 26
Selects a baud rate that is identical with your computer's so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector's firmware. This function is intended for
qualified service personnel.
Selecting On enables the function and the POWER LED on the
control panel lights when the project is in use.
Returns all settings to the factory preset values.
The following settings will still remain: PC & Component YPbPr
Tuning, Language, Projector Position, High Altitude Mode,
Security Setting and Baud Rate.
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE: Basic menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows firmware version.
"Operating in a high
for details.
for details.
for details.
for details.
for details.