Belkin F5D9230-4 User Manual page 39

Alternate Setup Method
3. Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
4. User Decide Login Server Manually
If your login server IP address is not available in the "Select Your
State" drop-down menu
server IP address by placing a check in the box next to "User
Decide Login Server Manually" and type in the address next to
"Login Server"
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that
translates Universal Resource Locators (URLs) like "www.belkin.com"
to IP addresses. Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router. The "Automatic from ISP"
(1)
box should be checked if your ISP did not give you a specific DNS
address. If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly. If your connection type is dynamic
or PPPoE, it is likely that you do not have to enter a DNS address.
Leave the "Automatic from ISP" box checked. To enter the DNS
address settings, uncheck the "Automatic from ISP" box and enter
your DNS entries in the spaces provided. Click "Apply Changes"
to save the settings.
(1)
(6)
, you may manually enter the login
(5)
.
37
(2)
(2)
1
2
3
4
5
6
7
8
9
10
11