Download Print this page

Home LYQ304-50S Assembly & Operation Instructions

50m 4arm metal rotary airer

Advertisement

Quick Links

Assembly & Operation Instructions
HOME 50M 4ARM METAL ROTARY AIRER
Parts Included
Directions for Use
1. Remove any protective paper / card packaging and recycle.
2. Please remove protective cap on upper section (a) before assembly.
Lower section (b) is to be inserted into upper section (a).
3. Establish a suitable location for the airer. Please ensure there is enough
room for it to rotate freely when fully open (2.63 meters diameter).
4. Install the ground spike. The spike included is for installation in a
concrete mix place. We recommend to follow below steps:
a. Dig a hole 20cm square and 40cm deep.
b. Partly fill the hole with concrete and place the spike upright in the center.
c. Complete filling with concrete and ensure when installing the ground
spike that it is firmly located in the vertical position.
d. Allow 48 hours for setting before use.
Operation
3 stage locking system - push progressively upwards for warm weather locking positions.
1. To open, remove Velcro strap and splay the arms away from the rotary. Slide
the centre collar upwards until it engages in the first tension position.
2. To change the height of the rotary depress the button positioned on the central
pole and locate at your desired height.
3. To close, depress the lift and click locking collar button and bring the arms
down to its lowest position.
Note: you can open and close this item at your set / desired operational height.
4. If you are experiencing difficulties opening this product check to ensure lines are not tangled.
5. When both section are left together for long periods, separation may become difficult.
Care Instructions
When not in use we recommend that the airer is covered and securely tied.
If removing from the ground socket for storage please ensure that
the airer is covered and kept out of the reach of children.
Wipe Clean with damp cloth.
Warning
Caution: Long cords present a risk of strangulation to children, ensure that the rotary airer is
removed from the ground socket and safely stored away from children when not in use.
Do not exceed maximum load (40kg).
Ensure locking mechanism is engaged before use.
Do not use this rotary airer in adverse weather conditions
Please use the Spike or Socket which is provided with your rotary airer.
This is not a children's toy. Do not allow children to play with the product.
(LYQ304-50S - 4337054)
(a)
Upper
Section
(b)
Lower
Section
(c)
Standard
metal
Ground
Spike
Operation

Advertisement

loading
Need help?

Need help?

Do you have a question about the LYQ304-50S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Home LYQ304-50S

  • Page 1 Assembly & Operation Instructions HOME 50M 4ARM METAL ROTARY AIRER (LYQ304-50S - 4337054) Parts Included Standard metal Upper Lower Ground Section Section Spike Directions for Use 1. Remove any protective paper / card packaging and recycle. 2. Please remove protective cap on upper section (a) before assembly.
  • Page 2 Line Tension Clip Occasionally the line on your rotary airer might sag, this can be due to a number of factors; weather conditions (lines are more prone to sagging in warmer weather), tangled lines, unevenly spaced lines and the rotary operation not being locked at its highest point.

This manual is also suitable for:

4337054