Advertisement
Quick Links
Thank you for purchasing this Jetstream product. We are proud to introduce this excellent
radio and feel you will be pleased with the quality and appearance.
Please observe the following precautions to prevent fire, personal injury and potential damage to the radio:
1
You should not operate this device while driving.
2
This radio is designed to use 13.8V dc voltage, do not use a 24V power supply.
3
Please do not place the radio in a dusty or damp environment
4
Avoid direct water splash on the unit.
5
To avoid overheating the unit; do not place the unit in direct sunlight or near other heat emitting
equipment.
6
If the unit begins emitting smoke or a strange smell you should immediately power off the unit and
investigate the issue.
7
Caution, transmitting on high power for long periods of time can result in the unit being hot and may
cause overheating.
Unpacking and inspection:
Before use, it is recommended that you:
1
Please check the packaging of this product to detect any signs of damage.
2
The list of pictured items below should be contained in the box. If you discover any missing parts or
any damage, immediately contact the dealer.
Standard accessories
JT2705M
Advertisement
Related Manuals for JETStream JT2705M
Summary of Contents for JETStream JT2705M
- Page 1 JT2705M Thank you for purchasing this Jetstream product. We are proud to introduce this excellent radio and feel you will be pleased with the quality and appearance. Please observe the following precautions to prevent fire, personal injury and potential damage to the radio: You should not operate this device while driving.
- Page 2 Hand mic description (JTMIC3) “MENU”: Function key “UP”: Advance the frequency or channel higher “DOWN”: Advance the frequency or channel Lower “EXIT”: Exit the AB channel switch, alarm function “/SCAN”: Start & Stop Channel or Frequency scanning, or involving the “*” character “#/LOCK”: Keypad Lock function, or involving the “#”...
-
Page 3: Front Panel
Front Panel Description: 1.Change Frequency or channel knob 2 Transmit/receive indicator light 3 Function key 4 Call key 5 Monitor function 6 Power key 7 Power indicator Light 8 Volume Level Knob 9 Microphone connection 10 FM radio button 11 Switch between A & B frequencies in VFO mode and alarm function (menu # 26) 12 Switch between VFO &... - Page 4 Programming Instructions (using front panel & mic keypad): Display Channel or Frequency: Press to switch between channel mode and frequency mode Note: Function menu 29 and 30 will allow you the choice to display the frequency, channel number or a 'Name'.
-
Page 5: To Delete A Channel
To delete a channel: Press “Exit/AB” to choose the “A” (top) or “B” (bottom) frequency display. Press button to choose Channel mode. Press button and rotate the large knob to function 37, (DEL-CH). Press and rotate the large knob to choose the channel number, finally press to delete the selected channel. - Page 6 Function Menu Descriptions: Second Menu Character Function The secondary menu settings character Turn Dual watch off D-frequency waiting Turn Dual watch on 5.00K 6.25K Set the step value, when in 10.00K STEP Step frequency frequency (VFO) mode 12.50K 25.00K Squelch step 0,….,9 Squelch Step Set xmit power to High...
- Page 7 Set this option to ON or OFF for the receiver to respond to a DCS tone. DCS receive tone R-DCS on/off and the Set this option ON for the receiver D023N,…,D754I tone frequency to respond to a specific DCS tone Set this option ON for the receiver Set CTCS receive to respond to a specific CTCS tone...
- Page 8 Turn off receive of optional signaling Listen for transmitted signals DTMF containing a DTMF tone. OPTISIG Optional signaling Listen for transmitted signals 2TONE containing 2 tones Listen for transmitted signals 5TONE containing 5 tones Mute the speaker Mute the speaker when tone is SPMUTE Mute the speaker received...
- Page 9 FREQ Display the channel frequency. CB-MDF B channel display Display the channel number mode NAME Enter a channel name to display. Lock the keyboard. AUTOLOK KeyLock Unlock the keyboard FULL Full screen display PONMSG BOOT mode Display only the specified information.
- Page 10 - Automatic Number ID of Radio (set with S/W) - Sent when PTT is pressed and/or released ANI radio ID XXXXX - Used to alert dispatcher which field radio was keyed - Used primarily for commercial applications. ANI-L Length 3,4,5 Set length of the ANI ID code Encode a single, unique frequency 1000...
- Page 11 The Key Technical Indexes: General specifications: VHF:136~174MHz Frequency range UHF:400~490MHz Number Of Channels Channel Spacing 25 KHz, 20KHz , 12.5KHz Phase lock step step 5KHz, 6.25KHz, 10KHz, 12.5KHz, 15KHz, 25KHz Working Voltage 13.8V DC±15% Squelch methods CTCSS/DCS/5Tone/2Tone/DTMF Frequency stability ±2.5ppm Operating Temperature -20~+60 ℃...
Need help?
Do you have a question about the JT2705M and is the answer not in the manual?
Questions and answers