To Use Block Recognizer; To Use Transcriber - Asus MyPal A730W Handbook

To use Block Recognizer:

With the Block Recognizer, you can input
character strokes that are similar to those
used on other devices.
1. Tap the arrow next to the Input Panel
button, then tap Block Recognizer.
2. Write a letter in the box.
When you write a letter, it is converted
to a typed text that appears on the
screen. For instructions and a
demonstration on using the Block
Recognizer, tap the question mark
next to the writing area.

To use Transcriber:

With Transcriber, you can use the stylus
to write anywhere on the screen as you
would on paper. Unlike Letter Recognizer
and Block Recognizer, you can write a
sentence or additional information. Pause
after writing and let Transcriber convert
the written characters to typed characters.
1. Tap the arrow next to the Input Panel
button, then tap Transcriber.
2. Write anywhere on the screen.
For instructions and demonstration on
using Transcriber, with Transcriber
open, tap the question mark in the lower right corner of the screen.
To edit typed text:
1. Select the text that you wish to edit using either one of the following:
• drag the stylus over the text
• tap twice to select a word
• tap three times to select a paragraph
2. Tap Edit on the Command bar and select an action, or use one of the
tools in the Input Panel to enter a new text.
Learn the basics 2-5