Do you have a question about the A4256 and is the answer not in the manual?
Questions and answers
Summary of Contents for euro3plast A4256
Page 1
Put some expanded clay into the bottom of the pot and add a layer of hessian. Cover the expanded clay with 3-5 cm. of potting soil. Set the plant down into the pot. euro3plast spa viale del lavoro, 45 r.e.a. VI n. 125725 www.euro3plast.com...
Page 2
The holes will allow excess rainwater to drain away. Place the plant with its original container inside the pot. It replaces the saucer and acts as a water reserve. euro3plast spa viale del lavoro, 45 r.e.a. VI n. 125725 www.euro3plast.com 36048 ponte di barbarano (vi) •...
Page 3
Check the water level indicator every once in a while. euro3plast spa viale del lavoro, 45 r.e.a. VI n. 125725 www.euro3plast.com...
Page 4
• viale del lavoro, 45 • 36048 ponte di barbarano (vi) italy • t +39 0444 788200 • f +39 0444 788290 pi/cf/vat (IT) 00331710244 • r.e.a. VI n. 125725 • cap.soc. € 3.000.000,00 int.vers. made in italy...
Page 5
In case of exposure to the sun, to prevent the pressure inside the pot from altering its shape, we recommend drilling some air vent holes around the top. euro3plast spa viale del lavoro, 45 r.e.a. VI n. 125725 www.euro3plast.com...
Page 6
- Clean with a wet sponge with water and a neutral cleaner. - Wipe clean with a damp cloth. - It is recommended to avoid using solvents. In a case very dirty, clean with euro3plast cleaner. Attention: permanent exposure to sun may change the original colour.
Need help?
Do you have a question about the A4256 and is the answer not in the manual?
Questions and answers