Subscribe to Our Youtube Channel
Related Manuals for DAILIS DLS-XS60
Summary of Contents for DAILIS DLS-XS60
- Page 1 Walk-behind Floor Scrubber Instruction Manual DLS-XS60 Please read this manual carefully before operation/please properly keep it.
- Page 2 Preface All models are enclosed with this manual. This manual provides necessary instructions for machine operation and maintenance. Please read and understand this manual carefully before operating or using this machine. Each new model is also enclosed with a complete parts manual, which shall be used when replacing the parts. In order to ensure timely delivery, please follow the instructions of "Parts Ordering Method"...
-
Page 3: Table Of Contents
Contents 1. Safety precautions ....................................1 2.Security labels ..................................... 3 3 Machine Description ..................................5 3.1 Unpack the machine ................................5 3.2 Installation the battery ................................5 4 Working mode of machine ................................6 4.1 Cleaning method: ................................. 6 5 Brush and scouring pad information ............................6 6 Machine installation ..................................7 6.1 Connect the suction rake assembly .......................... -
Page 4: Safety Precautions
1. Safety precautions This machine is a commercial product. It is specially used for cleaning indoor hard floor and must not be used for other purposes. Please be sure to use the recommended scouring pad, brush and neutral detergent suitable for this machine. The following safety warnings and the heading "For Safety Consideration"... - Page 5 2. Before starting the machine: - Ensure all safety devices are in place and operating normally. 3.When using the machine: - Please walk slowly in case of slopes or slippery surfaces. - Wear non-slip shoes. - Please slow down when turning. - Report immediately when the machine is damaged or the operation fails.
-
Page 6: Security Labels
2.Security labels The safety labels will be marked on the machine according to the indicated positions. If a label is missing, damaged or difficult to identify, please replace that label. The rotating brush label is on the brush head. Warning: The rotating brush is running. Warning: Keep your hands away. - Page 7 Name ① Battery meter ② Brush disc motor switch ③ Main power switch ④ Suction rake motor switch Name ① Clear water tank ② Electronic control board ③ Recovery tanks ④ Power negative wire (black) ⑤ Power positive wire (red) ⑥...
-
Page 8: Machine Description
3 Machine Description 3.1 Unpack the machine (1) Carefully check whether there is any damage on the packing box of the machine. Please report any damage to the carrier immediately. (2) Check the list of freight contents. If there are any missing items, please contact the distributors. Freight contents: 2-12V Battery-Optional ... -
Page 9: Working Mode Of Machine
4 Working mode of machine 4.1 Cleaning method: Water and detergent flow to the brush disc and the ground through water valves and solenoid valves. Clean the floor with detergent and water by rotating the brush disc. For the sewage produced, when the machine goes forward, the sewage on the floor will be sucked into the Recovery tank through the suction rake assembly and the suction motor. -
Page 10: Machine Installation
6 Machine installation 6.1 Connect the suction rake assembly Step.1: Park the machine on the horizontal ground, turn off all power switches and take out the key. Step.2: Pull up the lifting rod of the suction rake to the upper position Step.3: Mount the suction rake onto the suction rake mounting bracket, as shown in the figure . -
Page 11: Injection Of Solution Into The Clean Water Tank
Step.1: Park the machine on the horizontal ground, turn off all power, and take out the key. Step.2: Press down the brush disc lifting pedal and move it to the right (as shown by the arrow) so as to raise the brush disc motor. -
Page 12: Machine Operation
7 Machine operation For Safety Consideration: Do not operate the machine until you have read and understood the operation manual. Warning: fire or explosion hazard. Never operate the machine near or in a location with flammable liquids, gases, or flammable dust. 7.1 Pre-operation check - Clean up the dust on the floor. -
Page 13: During Operation Of The Machine
Step.3: For different floor cleaning requirements, the water output can be controlled by adjusting the water valve switch up and down . Step.4: To stop cleaning, please turn off the brush disc, the suction rake motor switch and the main power supply so as to raise the brush disc and suction rake. -
Page 14: Battery Meter
soaking in the solution for 3-5 minutes, lower the suction rake and clean it again. 8.When staff leaves the machine, please raise the suction rake and the brush disc, turn off all power switches and remove the key. 7.4 Battery meter The battery meter shows the level of electricity in the battery. -
Page 15: Drain The Clean Water Tank
7.8 Drain the clean water tank To drain the remaining water from the clean water tank, open the drain pipe cover of the clean water tank (Fig. 16). * If you would like to view more information, please contact us to obtain a full product brochure.
Need help?
Do you have a question about the DLS-XS60 and is the answer not in the manual?
Questions and answers