Ethereal CS-C5ADE Operating Instructions

Operating Instructions
CONNECTING AND OPERATING
1) Connect the audio input source into transmitter over audio cable.
2) Connect the output of transmitter and input of receiver over CAT5E or CAT6
cable.
3) Connect the audio output into the receiver over audio cable.
4) Connect power adapter in to the transmitter.
NOTE: Insert/Extract cables gently.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will , for the length of
the period indicated as below, (Parts (1 )Years ,Labor (1 )Years) which starts with
the date of original purchase ("Limited Warranty period"), at its option either(a) repair
your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labo�• Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in
your product during the warranty period. This Limited Warranty is extended only to
the original purchaser and only covers product purchased as new. A purchase
receipt or other proof of original purchase date is required for Limited Warranty
seivice.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol or solvents to clean this unit.
©2023 Ethereal Home Theatre
460 Walker Street, Holly HIii, FL 32117-2699
Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
386-255-0234 • Elherealpro.com
4
Digital & Analog Audio Extender over
Cat5e/6 Cable
Model: CS-C5ADE
Operating Instructions
0 0 --- •
--
.,
■
rn
�
w
II
I:.
w
(�
0
0
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
FEATURES
• Transmission Range: Analog audio up to 1480ft (450 meters), Digital audio up
to 1640ft (500 meters)
• Accepts Analog, Digital Coax or Optical Toslink
• Auto indentify audio input: Analog>Digital Coax>Optical Toslink
• Supports PCM2.0, Digital 5.1 (DTS, Dolby Digital, etc. )
• Input 44.1-96khz, output 48khz, 16-24bit
• Support AC 100-240V 50/60hz power, DC 12V/1A, dual POC
NOTICE
Our company reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
1
Operating Instructions
0 0 •
_____
,
��.,
rn
�
■
w
I:.
w
(�
0 0