Ide Swap Introduction; Using The Aibox; Stopping The Aibox Before Removing (Windows Me) - Asus L1A Software Setup Manual

IDE Swap Introduction

IDE Swap installs a Plug & Play utility to monitor the AiBox port and automatically enable the AiBox and
module device drivers. This utility is also used to disable the device drivers when you want to remove the
AiBox or eject a module device.
WARNING: If you remove the AiBox or module device without stopping the service, it can cause your
Notebook PC to crash and/or lose data.

Using the AiBox

Action While Notebook PC ON
Attaching Plug AiBox connector anytime, device will be auto enabled
Detaching Double click
Insert module Insert module into AiBox at anytime, device will be auto enabled
Remove module Remove module only after you stop the AiBox & unplug connector

Stopping the AiBox Before Removing (Windows ME)

When you double click on the
icon on the taskbar, this
screen will show. Click STOP
before disconnecting the AiBox
from the Notebook PC.
94
on taskbar, click STOP, wait for safe message
When you connect the AiBox or
insert a module, they will be au-
tomatically detected and enabled.
The Enable button is added here
so that you can enable a device if
you change your mind after dis-
abling it.
While Notebook PC OFF
Plug AiBox connector anytime when OFF
Un-plug AiBox connector anytime when OFF
Insert module into AiBox at anytime when OFF
Remove module at anytime when OFF
Click OK to confirm.
You will get this warning if you
don't stop the AiBox in Windows
ME.