Table of Contents
Advertisement
1.1
Remote Control Description
Same as your PMA400/
AV400 function buttons
Switch between Built-in &
External Video
Same as AV400/PMA400
Navigate, Execute &
Escape
Play, Pause,
fast Forward, fast Reverse
Open pre-recording screen
/ start recording
Change the TV channel
up / down (If the infrared
emitter is connected).
*AV400: Each time you place the AV400 into the TV Cradle, you must turn it on via the ENTER button, not
by the remote control's STANDBY/WAKE UP button. Once turned on in this way, you can use the remote
control's STANDBY/WAKE UP button normally. It is just upon placing the AV400 into the cradle that you must
turn it on by its ENTER button.
*PMA400: The PMA400 is always in standby mode when not on. Thus, you can wake up the PMA400 with
the remote control once you slip it into the cradle and connect the multi-connect plug.
6
Standby / Wake Up*
Attention: The AV400 must be
turned on fi rst by hand before
this button can be used.
Numeric entry
Go up or down one screen of
fi les in the browser mode
Jump to Previous / Next fi le
Leave Music Player to browse / Stop
Increase / Decrease Volume
Mute sound
5
Advertisement
Table of Contents
