Advertisement
Quick Links
1. Setup
•
Connect the tap water connection to the inlet of the PURASTART using the Gardena hose
•
Open the tap of the tap water connection
•
Unwind the hose to the required length
•
Connect the plug nipple to the nozzles on the brush bow
•
Hook the hose into the clips on the telescopic pole
2. Handling
•
Turn the stopcock to ‚ON', after a short time the PUREWATER will flow through the nozzles on the brush
Version 04/2024
Quick guide PURASTART (17042)
Advertisement
Summary of Contents for LEHMANN QLEEN PURASTART
- Page 1 Version 04/2024 Quick guide PURASTART (17042) 1. Setup • Connect the tap water connection to the inlet of the PURASTART using the Gardena hose • Open the tap of the tap water connection • Unwind the hose to the required length •...
- Page 2 Close the water supply and disconnect the connections • Drain the water from the granulate bottle • Close the stopcock • Wind up the hose Karlhans Lehmann KG, Kranichstraße 2a, DE -17235 Neustrelitz Homepage: www.qleen.de Phone: +49 (0)3981 48850 E-Mail: info@qleen.de...
Need help?
Do you have a question about the QLEEN PURASTART and is the answer not in the manual?
Questions and answers