Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MB-PT-18 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for mbeat MB-PT-18 Series

  • Page 3 Thank you for purchasing MB-PT-18 series turntable, please keep this manual for future reference. The MB-PT-18 series sports an aluminium alloy platter, reducing vibrations for an authentic listen- ing experience. Play all of your 33/45 RPM vinyls with variable pitch and built-in pre-amplifier; plug directly into your existing sound system.
  • Page 4: Installation

    Package Contents PRODUCT CARE Turntable Unit - Product designed for consumer and household application only. Removeable Cover/Lid - For your personal safety, no user serviceable parts inside. War- DC Adapter with AU plug-end ranty void if device opened. Counterweight - Do NOT operated under hot, humid or wet conditions Metal Platter - Prolonged exposure to loud sounds or music can lead to tem- Drive Belt...
  • Page 5 COMPONENTS, FEATURES AND CONNECTIONS 1. Counterweight 6. 33/45 Selector 10. Lid 15. Anti-skating Weight 2. Anti-skating Stub 7. Tonearm 11. Lid Hinge 16. USB-PC port 3. Turntable Platter 8. Stop/Start Knob 12. Ground Connector 17. AC-DC Power Jack 4. Tonearm Lift Lever 9.
  • Page 6 Turntable Platter and Belt Setup Cartridge Down force Adjustment Counterweight Downforce scale Centerline The counterweight supplied is suitable for cartridges weighing between 3.0-6.0g. 1. Secure the drive belt over the inner ring under the turntable platter. - Screw the counterweight onto the rear of the tonearm; the scale should be facing the front of the turntable.
  • Page 7 Anti-skating force adjustment The anti-skating force must be adjusted corresponding to the down force as follows: - Once the tonearm is correctly balanced return it to the tonearm rest. Hold the counterweight without moving it, and slowly turn the Downforce Scale ring until the zero is in line with black line on the rear of the tonearm.
  • Page 8 Connecting to a stereo system Connecting to an amplifier - Set the PHONO & Line Out Switch on LINE mode. - This turntable unit uses a moving magnetic cartridge - Set the PHONO & Line Out Switch to PHONO mode. - The RCA PHONO &...
  • Page 9: Operation

    OPERATION Bluetooth Operation Turntable Operation This unit has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly. - Connect the included power adapter to turntable and flick the power switch to the ”on” position. 1. Turn on your Bluetooth speaker and ensure it is in pairing mode. - Remove the protective cap of the stylus/cartridge 2.
  • Page 10 2. Recording Audacity and USB Connection 2. 1 Open the software 2.2 Choose “Edit” menu, then choose “Preferences”; It supports Windows95/Window XP/Window 7/Vista or more ad- vanced version, with the EMS memory more than 128MB and Au- dacity take space of 5MB. Recording the LP into PC through USB jack: For installing and recording step please reference to the BRIEF INTRODUCTION OF AUDACITY.
  • Page 11 NOTE: You need to check your computer audio properties, the sound recording should be selected: SSS USB Audio Device” as below: 2.4. 1 Press this button , start recording. 2.4.2 Click the button to skip to start; 2.4.3 Click the button to skip to end;...
  • Page 12 If do not see the sound wave on the interface, when recording, 3. After opened, it will come to the following menu, click “YES” to please adjust the line in volume as follows: go to “Llame_enc.dll”, and find the file’s location. Specific Steps as follows: 1.
  • Page 13: Troubleshooting

    TROUBLESHOOTING Distorted or inconsistent sound from one or both channels: - Turntable is connected to wrong input on amplifier. Potential Incorrect Use and Fault Conditions - Needle or cantilever damaged. This turntable is manufactured to the highest standards and un- - Drive belt overstretched or dusty/dirty.
  • Page 14 Looking for more help? 4. Mount the new cartridge to the headshell and tighten it lightly. Please visit mbeat.com.au for product details. Do not completely tighten the screws at this moment. Support email: support@mbeat.com.au 5.
  • Page 16 Connect To Life. www.mbeat.com.au support@mbeat.com.au mbeat mbeataustralia mbeat_australia...

Table of Contents