Subscribe to Our Youtube Channel
Related Manuals for Anker SOLIX C300
Summary of Contents for Anker SOLIX C300
- Page 1 What's in the Box Overview Recharge Your Power Station Powering Your Device Light The Anker App for Smart Control Install Firmware Update Specifications...
-
Page 2: What's In The Box
What's in the Box C1:15W C2:140W C3:140W A:12W Anker SOLIX C300 Portable Power AC Charging Cable Important Safety Instructions Station Overview C1:15W C2:140W C3:140W A:12W Handle Strap Attachment* 140W USB-C Input/Output Port · [ ] indicates a bidirectional interface. Car Socket... - Page 3 Reset IoT Button AC Output On/Off Button *The strap attachments are designed for Anker SOLIX adjustable straps (sold separately). Recharge Your Power Station AC Recharging (330W Max) Recharge your power station by connecting to a wall outlet with the AC charging cable.
- Page 4 Solar Panel Recharging (100W Max) Recharge your power station with a maximum solar input of 100W by connecting up to one Anker 100W/60W Solar Panel as shown in the figure with a solar charging cable. The voltage of the solar panel should be 11V-28V, otherwise it will damage the power station.
-
Page 5: Powering Your Device
When the "Remaining Battery" indicator shows on the LCD screen, your power station is ready to charge devices. • When powered on, press the main power button to turn the screen on or off. • The screen will automatically turn off after 15 seconds of lighting up. The auto-off time can be set in the Anker app. - Page 6 AC Charging Press the AC outlet button and connect your device with the AC output ports. The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning off the power station if no plug is detected for more than 15 minutes. USB Charging Connect your devices to the USB ports.
- Page 7 A:12W SurgePad™ Anker SOLIX C300 Portable Power Station supports the SurgePad™ feature for up to 600W AC output. SurgePad™ automatically turns on when the total output exceeds the rated output, allowing the power station to deliver rated power to high-wattage devices.
- Page 8 Light Ambient Light Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness levels. ×1 ×2 ×3 C1:15W C2:140W C3:140W A:12W SOS Mode Hold the button for 2 seconds to turn on SOS mode. C1:15W C2:140W C3:140W...
- Page 9 LCD Screen Guide Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon appears on the screen. Press the IoT button for 2 seconds to turn off Bluetooth and Wi-Fi. Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
- Page 10 You can remotely control your power station using the Anker app. 1. Download the Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning the QR code. 2. Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your device off-grid.
- Page 11 The solar input supports an 11-28V solar charger with an XT-60 connector. We recommend using Anker 100W/60W Solar Panel for the best compatibility. Q4: Can the USB-C ports be used to charge Anker SOLIX C300 Portable Power Station (input only) or are they output only? The USB-C1 and USB-C3 ports are output only.
-
Page 12: Specifications
Specifications Cell Capacity 288Wh AC Input Voltage 120V~3.5A Max, 60Hz AC Input Power (Charging) 330W Max AC Input Power (Bypass Mode) 380W Max Solar Panel Input 11-28V 8.2A (100W Max) USB-C2 Input 9V 3A / 15V 3A / 20V 5A / 28V 5A (140W Max) Car Charger Output 12V 10A AC Output (Inverter Mode)
Need help?
Do you have a question about the SOLIX C300 and is the answer not in the manual?
Questions and answers
Can I increase the number of USB ports on my Anker solix 300