Table of Contents
Advertisement
Quick Links
KNOW YOUR PRODUCT
HIGH PRESSURE
WASHER
• TRI-AXIAL BRASS PUMP HEAD
• POWERFUL INDUCTION MOTOR
• INTEGRATED DETERGENT TANK
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1222
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Full Boar FBEPW-2500
Summary of Contents for Full Boar FBEPW-2500
- Page 1 KNOW YOUR PRODUCT HIGH PRESSURE WASHER • TRI-AXIAL BRASS PUMP HEAD • POWERFUL INDUCTION MOTOR • INTEGRATED DETERGENT TANK INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
-
Page 2: Know Your Product
SPECIFICATIONS - MODEL NO. FBEPW-2500 KNOW YOUR PRODUCT (cont.) Mains voltage: 220-240V ~ 50Hz Input power: 2400W MAX. Allowable pressure: 17MPa (2465psi) Rated pressure: 13MPa (1885psi) Max. Flow rate: 8.0L/min Rated flow: 7.3L/min Max. Inlet pressure: 1MPa (145psi) Detergent tank:... -
Page 3: Table Of Contents
Congratulations on purchasing a Full Boar High Pressure Washer. KNOW YOUR PRODUCT........... Page 02 Your Full Boar High Pressure Washer FBEPW-2500 is designed to deliver a consistent high-pressure flow INTRODUCTION............Page 05 that’s ideal for on-site cleaning bricks, driveways, patio’s SAFETY INSTRUCTIONS......... - Page 4 GENERAL POWER TOOL SAFETY WARNINGS (cont.) GENERAL POWER TOOL SAFETY WARNINGS d) Remove any adjusting key or wrench before turning the machine on. A wrench WARNING! Read all safety warnings, instructions, illustrations and or a key left attached to a rotating part of the machine may result in personal injury. specifications provided with this machine.
- Page 5 PRESSURE WASHER SAFETY WARNINGS PRESSURE WASHER SAFETY WARNINGS (cont.) • High pressure hoses, fittings and couplings are important for the safety of the WARNING! The appliance is not to be used by persons (including children) with reduced appliance. Use only hoses, fittings and couplings recommended by the manufacturer. physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
-
Page 6: Assembly
ASSEMBLY ASSEMBLY (cont.) Attach turbo nozzle holder WARNING! Ensure the tool is turned off and disconnected from the power supply before performing any of the following operations. 1. Slide the Turbo nozzle holder (14) onto the slot on the other side of the unit until Attach spray gun holder &... -
Page 7: Setup & Preparation
SETUP & PREPARATION SETUP & PREPARATION (cont.) Spray nozzle selection Turbo nozzle Included are five spray nozzles (11), plus a Turbo nozzle (12). Five of the spray Delivers a high impact rotating jet spray for nozzles (11) are colour coded and provides a specific spray pattern and removing ingrained dirt that covers a large pressure for a particular application. - Page 8 SETUP & PREPARATION (cont.) SETUP & PREPARATION (cont.) Connecting the water supply 4. Turn on the water supply. 5. Squeeze trigger on the spray gun (4) until there is a steady flow of water WARNING! Ensure the machine is turned off and disconnected from from the nozzle (fig.
-
Page 9: Operation
OPERATION OPERATION (cont.) Shutting the unit down WARNING! The power supply for this product must be protected by a residual current device rated at 30mA or less. WARNING! Pressurised water. Shut off water supply, turn off unit The high pressure washer is designed to force water at high pressure via a and squeeze the spray gun trigger to relieve the pressure before pump through a concentrating nozzle. - Page 10 OPERATION (cont.) OPERATION (cont.) Usage tips Using detergents • For most effective cleaning, keep spray nozzle from 200 - 600 mm away Most cleaning tasks can be completed with the pressure washer alone. from cleaning surface. For others, it is advantageous to use detergent. Use only liquid detergents •...
-
Page 11: Maintenance
MAINTENANCE MAINTENANCE (cont.) Nozzles WARNING! Ensure the tool is turned off and disconnected from the power supply before performing any of the following operations. A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessive pump pressure. The principal cause of excessive pump pressure is a Regular maintenance will improve performance and extended the life of nozzle clogged or restricted with foreign materials, such as dirt, etc. -
Page 12: Storage
STORAGE KNOW YOUR PRODUCT TROUBLESHOOTING When not in use, the pressure washer should be stored in a dry, frost free Symptom Possible Cause Suggested Solution location not within the reach of children. Fluctuating Check that the connections are Store the equipment and its accessories in a dark and dry place at above The pump is pressure securely installed. -
Page 13: Description Of Symbols
CARING FOR THE ENVIRONMENT KNOW YOUR PRODUCT DESCRIPTION OF SYMBOLS Power tools that are no longer usable should not be Volts Hertz disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with Alternating Current Watts your local council authority for recycling advice. -
Page 14: Contents
CONTENTS KNOW YOUR PRODUCT 1 x Electric high pressure washer 1 x Turbo nozzle holder 1 x Gun & lance 1 x Power cable holder 5 x Spray nozzles 1 x Water inlet connector (with filter) 1 x Turbo nozzle 1 x Cleaning needle 1 x Spray gun holder 4 x Assembly screw... -
Page 15: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 951 371 New Zealand 0800 647 840...
Need help?
Do you have a question about the FBEPW-2500 and is the answer not in the manual?
Questions and answers
Need a new high pressur 10 meter hose