Komatsu G300AV Quick Start Manual

2. Specifications
ao o oe G300AV
755
D
T ae
Mixture (Gasoline 25: Two cyce oil
Fuel tank capacity
~E NOARH
Thank you very much for choosing our 8
quality product.
This manua! explains how to make
most use of your unit. ; ;
PI ty fully bef rti the engine stopped, the guide bar
Fase ead SOL ney ore starting and saw chain to the rear, and the
operation. muffler away from your body.
Should you have any trouble with your 10. Never operate a chain saw that is
unit, please consult our local dealer damaged, improperly adjusted, or
2 is not completely and securely
or us directly.
; assembled. Besure that the saw
The contents of this manual are accu- chain stops moving when the
rate at the time of issue but may be throttle control trigger is released.
changed without notice. 11. Always shut off the engine before
Diaphragm type
Spark plug
Champion CJ-8Y
Oil feeding system
Mechanical pump
375 x 225 x 240
35
C N
ee ee
E,
. Before you start the engine, make
sure the sew chain is not contact-
ing anything.
9. Always carry the chain saw with Dimensions (L x WxH)
375 x 230 x 240
Dry weight
kg
Oregon 9186
Se ERO
E
G300AVS is equipped with Chain Brake.
12.
setting it down.
Use extreme caution when cutting
small size brush and saplings be-
cause slender material may catch
Contents the saw chain and be whipped
toward you or pull you off balance.
1. For Safe Operation 13. When cutting a limb that is under
2. Specifications tension, be alert for spring back so
3. Installing Guide bar and Saw ae you will da be sarge ela : .
chain THe TENSION IN Ae MP UES IS 3. Installing Guide bar and
o released. S hai
4. Fuel and Chain oil 14. Keep the handles dry, clean and
aw cnain
5. Operating Engine free of oil or fuel mixture. —
6. Sawing
15. hai ae chain saw only in well
A standard saw unit package contains
ventilated areas. ,
7. Maintenance
16. Do not operate a chain saw in a
the items as shown below.
8. Troubleshooting Guide tree unless specially trained to do
SO.
Specifications are subject to change without notice.
(1) Power unit
1. Never operate a chain saw when
you are fatigued.
2. Use safety footwear, snug fitting
clothing and eye, hearing and head
protection devices.
3. Always use caution when handling
fuel. Move the chain saw at least
ten (10) feet (three (3) m) from
the fueling point before starting
the engine.
4. Do not allow other persons to be
near the chain saw when starting
or cutting, keep bystanders and
animals out of the work area.
5. Never start cutting until you have a
clear work area, secure footing,
and a planned retreat path from
the falling tree.
6. Always hold the chain saw firmly
with both hands when the engine
is running. Use a firm grip with
thumb and fingers encircling the
chain saw handles.
7. Keep all parts of your body away
from the saw chain when the
engire is running.
18.
19.
used to remove the flywheel, or
if an improper too! is used to hold
the fly-wheel in order to remove
the clutch, structural damage to
the flywheel could occur which
could subsequently cause the fly-
wheel to disintegrate).
Guard against kickback. Kickback
is the upward motion of the guide
bar which occurs when the saw
chain at the nose of the guide bar
contact an object. Kickback can
lead to dangerous loss of control
of the chain saw.
When transporting you chain saw,
use the appropriate guide bar
scabbard.
TO AVOID KICKBACK:
Hold the chain saw firmly with
both hands. Do not overrach.
Do not let the nose of the guide bar
contact a jog, branch, ground or
any other obstruction.
Cut at high engine speeds.
Don't cut above shoulder height.
Follow manufacturer's sharpening
and maintenance instructions for
the saw chain.
(2)
(5)