Kroks SIM Injector Manual

1957
KROKS SIM Injector
Manual. Product passport.
1. Purpose
1.1. The SIM injector is a device for remotely connecting SIM cards to a router in an external antenna via a UTP twisted pair cable at a
distance of up to 50 meters.
The SIM injector is placed indoors near the user's PC for remote installation and replacement of SIM cards without dismantling the ex-
ternal antenna. Support for two SIM-cards allows you to use the services of several operators and create a backup communication chan-
nel.
The device only works with KROKS routers that support SIM injector.
1.2. The front panel of the SIM-injector displays an indication of the signal level and the operating mode of the router. Signal level in-
dicators help to assess the quality of the received signal, and point the antenna at the base station.
A power supply unit is included to power the SIM injector and the router. Data transmission and power supply of the router is carried
out via UTP 4 CAT5E 24 twisted pair cable. The use of passive PoE 24 V technology ensures a stable power supply voltage of the router at a
distance of up to 50 meters.
To supply PoE power to the SIM injector through the LAN port, purchase a PoE power injector.
1.3. When purchasing the device, check its completeness. Attention! After purchasing the router, claims for incompleteness are not
accepted!
2. Designation of indicators and ports of the device
Location of indicators and ports of the SIM-injector
Designations of indicators on the SIM-injector panel and antenna housing
switched off The power supply is not connected or the power circuit of the device is faulty.
The router is loading or updating. If the indicator is on for more than 5 minutes, there is no con-
Status light
nection to the router.
blink Connection with the router is established, normal operation mode.
Internet connection indicator.
Internet
Operation indicator of SIM-cards located in the SIM-injector.
SIM-card
Signal level indicators.
Signal
Port designation in the SIM injector
SIM 1, SIM 2 Slots for installing SIM-cards.
Port for connecting a user device (PC, laptop, Wi-Fi router). It is possible to supply power to the device and the
LAN
router located in the antenna from a 24 V PoE injector through the LAN port.
Port for connecting a router located in the antenna using a UTP 4 CAT5E 24 twisted pair cable. Provides PoE power
WAN
to the router installed in the antenna over a twisted pair cable.
POWER 7-24V Connector for connecting the power supply plug.
Designation of SIM-injector buttons
RST Reset button to reboot devices and return to factory settings.
3. Technical specifications
Ports and interfaces of the SIM injector:
 Ports Ethernet – 2 шт., 100 Mbps
WAN + PoE OUT – 1 pcs
o
LAN + PoE IN – 1 pcs
o
 SIM-reader – 2 pcs
Power: 7-24 В.
LLC "Kroks Plus"
394005, Voronezh, Moskovsky pr. 133-263
+7 (473) 290-00-99
info@kroks.ru
https://kroksw.com/
Default settings:
 Pressing the button (RESET) for up to 5 seconds will reboot
the device.
 Pressing the button (RESET) for 5 to 30 seconds returns to
the factory settings.
1957
KROKS SIM Injector
Manual. Product passport.
1. Purpose
1.1. The SIM injector is a device for remotely connecting SIM cards to a router in an external antenna via a UTP twisted pair cable at a
distance of up to 50 meters.
The SIM injector is placed indoors near the user's PC for remote installation and replacement of SIM cards without dismantling the ex-
ternal antenna. Support for two SIM-cards allows you to use the services of several operators and create a backup communication chan-
nel.
The device only works with KROKS routers that support SIM injector.
1.2. The front panel of the SIM-injector displays an indication of the signal level and the operating mode of the router. Signal level in-
dicators help to assess the quality of the received signal, and point the antenna at the base station.
A power supply unit is included to power the SIM injector and the router. Data transmission and power supply of the router is carried
out via UTP 4 CAT5E 24 twisted pair cable. The use of passive PoE 24 V technology ensures a stable power supply voltage of the router at a
distance of up to 50 meters.
To supply PoE power to the SIM injector through the LAN port, purchase a PoE power injector.
1.3. When purchasing the device, check its completeness. Attention! After purchasing the router, claims for incompleteness are not
accepted!
2. Designation of indicators and ports of the device
Location of indicators and ports of the SIM-injector
Designations of indicators on the SIM-injector panel and antenna housing
switched off The power supply is not connected or the power circuit of the device is faulty.
The router is loading or updating. If the indicator is on for more than 5 minutes, there is no con-
Status light
nection to the router.
blink Connection with the router is established, normal operation mode.
Internet connection indicator.
Internet
Operation indicator of SIM-cards located in the SIM-injector.
SIM-card
Signal level indicators.
Signal
Port designation in the SIM injector
SIM 1, SIM 2 Slots for installing SIM-cards.
Port for connecting a user device (PC, laptop, Wi-Fi router). It is possible to supply power to the device and the
LAN
router located in the antenna from a 24 V PoE injector through the LAN port.
Port for connecting a router located in the antenna using a UTP 4 CAT5E 24 twisted pair cable. Provides PoE power
WAN
to the router installed in the antenna over a twisted pair cable.
POWER 7-24V Connector for connecting the power supply plug.
Designation of SIM-injector buttons
RST Reset button to reboot devices and return to factory settings.
3. Technical specifications
Ports and interfaces of the SIM injector:
 Ports Ethernet – 2 шт., 100 Mbps
WAN + PoE OUT – 1 pcs
o
LAN + PoE IN – 1 pcs
o
 SIM-reader – 2 pcs
Power: 7-24 В.
LLC "Kroks Plus"
394005, Voronezh, Moskovsky pr. 133-263
+7 (473) 290-00-99
info@kroks.ru
https://kroksw.com/
Default settings:
 Pressing the button (RESET) for up to 5 seconds will reboot
the device.
 Pressing the button (RESET) for 5 to 30 seconds returns to
the factory settings.